[PATCH 17/17] arm64: dts: apple: t8112: Initial t8112 (M2) device trees
Janne Grunau
j at jannau.net
Mon Feb 13 06:01:13 PST 2023
On 2023-02-13 12:22:11 +0100, Krzysztof Kozlowski wrote:
> On 12/02/2023 16:41, Janne Grunau wrote:
> > From: Hector Martin <marcan at marcan.st>
> >
> > This adds device trees for the following devices:
> > - Macbook Air (M2, 2022)
> > - Macbook Pro 13" (M2, 2022)
> > - Mac mini (M2, 2023)
> >
> > Signed-off-by: Hector Martin <marcan at marcan.st>
> > Co-developed-by: Janne Grunau <j at jannau.net>
> > Signed-off-by: Janne Grunau <j at jannau.net>
> > ---
> > arch/arm64/boot/dts/apple/Makefile | 3 +
> > arch/arm64/boot/dts/apple/t8112-j413.dts | 71 ++
> > arch/arm64/boot/dts/apple/t8112-j473.dts | 60 ++
> > arch/arm64/boot/dts/apple/t8112-j493.dts | 60 ++
> > arch/arm64/boot/dts/apple/t8112-jxxx.dtsi | 81 ++
> > arch/arm64/boot/dts/apple/t8112-pmgr.dtsi | 1141 +++++++++++++++++++++++++++++
> > arch/arm64/boot/dts/apple/t8112.dtsi | 904 +++++++++++++++++++++++
> > 7 files changed, 2320 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
> > index 5a7506ff5ea3..aec5e29cdfb7 100644
> > --- a/arch/arm64/boot/dts/apple/Makefile
> > +++ b/arch/arm64/boot/dts/apple/Makefile
> > @@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
> > dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
> > dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
> > dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
> > +dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
> > +dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
> > +dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
> > diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts
> > new file mode 100644
> > index 000000000000..0e5b5add92cf
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/t8112-j413.dts
> > @@ -0,0 +1,71 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Apple MacBook Air (M2, 2022)
> > + *
> > + * target-type: J413
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "t8112.dtsi"
> > +#include "t8112-jxxx.dtsi"
> > +
> > +/ {
> > + compatible = "apple,j413", "apple,t8112", "apple,arm-platform";
> > + model = "Apple MacBook Air (13-inch, M2, 2022)";
> > +
> > + aliases {
> > + bluetooth0 = &bluetooth0;
> > + wifi0 = &wifi0;
> > + };
> > +};
> > +
> > +/*
> > + * Force the bus number assignments so that we can declare some of the
> > + * on-board devices and properties that are populated by the bootloader
> > + * (such as MAC addresses).
> > + */
> > +&port00 {
> > + bus-range = <1 1>;
> > + wifi0: wifi at 0,0 {
> > + compatible = "pci14e4,4433";
> > + reg = <0x10000 0x0 0x0 0x0 0x0>;
> > + /* To be filled by the loader */
> > + local-mac-address = [00 10 18 00 00 10];
> > + apple,antenna-sku = "XX";
> > + brcm,board-type = "apple,hokkaido";
> > + };
> > +
> > + bluetooth0: bluetooth at 0,1 {
> > + compatible = "pci14e4,5f71";
> > + reg = <0x10100 0x0 0x0 0x0 0x0>;
> > + /* To be filled by the loader */
> > + local-bd-address = [00 00 00 00 00 00];
> > + brcm,board-type = "apple,hokkaido";
> > + };
> > +};
> > +
> > +/*
> > + * Remove unused PCIe ports
> > + */
> > +
> > +/delete-node/ &port01;
>
> You should not delete devices just because they are unused. Externally
> visible buses should be just disabled in DTSI and you enable them when
> needed. Not the opposite way.
>
> What's more, you must node delete nodes just because they are "not
> used". This not anymore proper description of hardware.
I agree, this is copied from the M1 and M1 Pro/Max/Ultra devictrees.
I'll fix it there as well.
>
> > +/delete-node/ &port02;
> > +/delete-node/ &port03;
> > +
> > +&i2c0 {
> > + /* MagSafe port */
> > + hpm5: usb-pd at 3a {
> > + compatible = "apple,cd321x";
> > + reg = <0x3a>;
> > + interrupt-parent = <&pinctrl_ap>;
> > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> > + interrupt-names = "irq";
> > + };
> > +};
> > +
> > +&i2c4 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts
> > new file mode 100644
> > index 000000000000..55950d0a73c5
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/t8112-j473.dts
> > @@ -0,0 +1,60 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Apple Mac mini (M2, 2023)
> > + *
> > + * target-type: J473
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + */
> > +
> > +/dts-v1/;
>
> (....)
>
>
> > +
> > + ps_debug_switch: power-controller at b8 {
> > + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
> > + reg = <0xb8 4>;
> > + #power-domain-cells = <0>;
> > + #reset-cells = <0>;
> > + label = "debug_switch";
> > + apple,always-on; /* Core AON device */
> > + };
> > +};
> > +
> > diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
> > new file mode 100644
> > index 000000000000..974443913f6a
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/t8112.dtsi
> > @@ -0,0 +1,904 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Apple T8112 "M2" SoC
> > + *
> > + * Other names: H14G
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + */
>
>
> (...)
>
> > +
> > + aic: interrupt-controller at 23b0c0000 {
> > + compatible = "apple,t8112-aic", "apple,aic2";
> > + #interrupt-cells = <3>;
> > + interrupt-controller;
> > + reg = <0x2 0x3b0c0000 0x0 0x8000>,
> > + <0x2 0x3b0c8000 0x0 0x4>;
> > + reg-names = "core", "event";
> > + power-domains = <&ps_aic>;
> > +
> > + affinities {
> > + e-core-pmu-affinity {
> > + apple,fiq-index = <AIC_CPU_PMU_E>;
> > + cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
> > + };
> > +
> > + p-core-pmu-affinity {
> > + apple,fiq-index = <AIC_CPU_PMU_P>;
> > + cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
> > + };
> > + };
> > + };
> > +
> > + pmgr: power-management at 23b700000 {
> > + compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
>
> Why this is simple-mfd?
I suppose because the syscon device is not limited to power domain
controls. The dt-bindings in arm/apple/apple,pmgr.yaml specify those
compatibles. See the original discussion in:
https://lore.kernel.org/linux-devicetree/57991dac-196e-a76d-831a-d4ac166bfe29@marcan.st/
>
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0x2 0x3b700000 0 0x14000>;
> > + };
>
>
> > +
> > + pmgr_mini: power-management at 23d280000 {
> > + compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
>
> Why this is simple-mfd?
see above
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0x2 0x3d280000 0 0x4000>;
> > + };
>
thanks
Janne
More information about the linux-arm-kernel
mailing list