[PATCH] Fix setting up CPU and User ports to be in the correct mode during setup and when toggling vlan_filtering on a bridge port.
Richard van Schagen
richard at routerhints.com
Sun Feb 12 13:39:49 PST 2023
---
drivers/net/dsa/mt7530.c | 124 ++++++++++++++-------------------------
1 file changed, 43 insertions(+), 81 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 3a15015bc409..f98a94361c84 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1027,6 +1027,12 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_FALLBACK_MODE);
+ mt7530_rmw(priv, MT7530_PVC_P(port),
+ VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
+ VLAN_ATTR(MT7530_VLAN_USER) |
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
+ MT7530_VLAN_ACC_ALL);
+
return 0;
}
@@ -1229,10 +1235,6 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
- /* Set to fallback mode for independent VLAN learning */
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_FALLBACK_MODE);
-
mutex_unlock(&priv->reg_mutex);
return 0;
@@ -1242,15 +1244,6 @@ static void
mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
- bool all_user_ports_removed = true;
- int i;
-
- /* This is called after .port_bridge_leave when leaving a VLAN-aware
- * bridge. Don't set standalone ports to fallback mode.
- */
- if (dsa_port_bridge_dev_get(dsa_to_port(ds, port)))
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_FALLBACK_MODE);
mt7530_rmw(priv, MT7530_PVC_P(port),
VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
@@ -1261,27 +1254,6 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
/* Set PVID to 0 */
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
-
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
- if (dsa_is_user_port(ds, i) &&
- dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
- all_user_ports_removed = false;
- break;
- }
- }
-
- /* CPU port also does the same thing until all user ports belonging to
- * the CPU port get out of VLAN filtering mode.
- */
- if (all_user_ports_removed) {
- struct dsa_port *dp = dsa_to_port(ds, port);
- struct dsa_port *cpu_dp = dp->cpu_dp;
-
- mt7530_write(priv, MT7530_PCR_P(cpu_dp->index),
- PCR_MATRIX(dsa_user_ports(priv->ds)));
- mt7530_write(priv, MT7530_PVC_P(cpu_dp->index), PORT_SPEC_TAG
- | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
- }
}
static void
@@ -1292,36 +1264,24 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
/* Trapped into security mode allows packet forwarding through VLAN
* table lookup.
*/
- if (dsa_is_user_port(ds, port)) {
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_SECURITY_MODE);
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID(priv->ports[port].pvid));
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+ MT7530_PORT_SECURITY_MODE);
+ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
+ G0_PORT_VID(priv->ports[port].pvid));
- /* Only accept tagged frames if PVID is not set */
- if (!priv->ports[port].pvid)
- mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
- MT7530_VLAN_ACC_TAGGED);
+ /* Only accept tagged frames if PVID is not set */
+ if (!priv->ports[port].pvid)
+ mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
+ MT7530_VLAN_ACC_TAGGED);
- /* Set the port as a user port which is to be able to recognize
- * VID from incoming packets before fetching entry within the
- * VLAN table.
- */
- mt7530_rmw(priv, MT7530_PVC_P(port),
- VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
- VLAN_ATTR(MT7530_VLAN_USER) |
- PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
- } else {
- /* Also set CPU ports to the "user" VLAN port attribute, to
- * allow VLAN classification, but keep the EG_TAG attribute as
- * "consistent" (i.o.w. don't change its value) for packets
- * received by the switch from the CPU, so that tagged packets
- * are forwarded to user ports as tagged, and untagged as
- * untagged.
- */
- mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
- VLAN_ATTR(MT7530_VLAN_USER));
- }
+ /* Set the port as a user port which is to be able to recognize
+ * VID from incoming packets before fetching entry within the
+ * VLAN table.
+ */
+ mt7530_rmw(priv, MT7530_PVC_P(port),
+ VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+ VLAN_ATTR(MT7530_VLAN_USER) |
+ PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
}
static void
@@ -1526,20 +1486,11 @@ static int
mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct netlink_ext_ack *extack)
{
- struct dsa_port *dp = dsa_to_port(ds, port);
- struct dsa_port *cpu_dp = dp->cpu_dp;
-
- if (vlan_filtering) {
- /* The port is being kept as VLAN-unaware port when bridge is
- * set up with vlan_filtering not being set, Otherwise, the
- * port and the corresponding CPU port is required the setup
- * for becoming a VLAN-aware port.
- */
+ if (vlan_filtering)
mt7530_port_set_vlan_aware(ds, port);
- mt7530_port_set_vlan_aware(ds, cpu_dp->index);
- } else {
+ else
mt7530_port_set_vlan_unaware(ds, port);
- }
+
return 0;
}
@@ -2225,10 +2176,16 @@ mt7530_setup(struct dsa_switch *ds)
/* Set default PVID to 0 on all user ports */
mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
+
+ mt7530_rmw(priv, MT7530_PVC_P(i),
+ VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
+ VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
+ MT7530_VLAN_ACC_ALL);
+
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_PORT_VLAN_MASK,
+ MT7530_PORT_MATRIX_MODE);
}
- /* Enable consistent egress tag */
- mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
- PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
/* Setup VLAN ID 0 for VLAN-unaware bridges */
@@ -2412,11 +2369,16 @@ mt7531_setup(struct dsa_switch *ds)
/* Set default PVID to 0 on all user ports */
mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
- }
- /* Enable consistent egress tag */
- mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
- PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+ mt7530_rmw(priv, MT7530_PVC_P(i),
+ VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
+ VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
+ MT7530_VLAN_ACC_ALL);
+
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_PORT_VLAN_MASK,
+ MT7530_PORT_MATRIX_MODE);
+ }
}
/* Setup VLAN ID 0 for VLAN-unaware bridges */
--
2.30.2
More information about the linux-arm-kernel
mailing list