[PATCH 1/3] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema

[Krzysztof Kozlowski]

Convert the Samsung S5K6A3(YX) raw image sensor bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../bindings/media/i2c/samsung,s5k6a3.yaml    | 98 +++++++++++++++++++
 .../bindings/media/samsung-s5k6a3.txt         | 33 -------
 2 files changed, 98 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
new file mode 100644
index 000000000000..7e83a94124b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
+
+description:
+  S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: samsung,s5k6a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: extclk
+
+  clock-frequency:
+    default: 24000000
+    description: extclk clock frequency
+
+  gpios:
+    maxItems: 1
+    description: GPIO connected to the RESET pin
+
+  afvdd-supply:
+    description: AF (actuator) voltage supply
+
+  svdda-supply:
+    description: Core voltage supply
+
+  svddio-supply:
+    description: I/O voltage supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - gpios
+  - afvdd-supply
+  - svdda-supply
+  - svddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor at 10 {
+            compatible = "samsung,s5k6a3";
+            reg = <0x10>;
+            clock-frequency = <24000000>;
+            clocks = <&camera 1>;
+            clock-names = "extclk";
+            gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+            afvdd-supply = <&ldo19_reg>;
+            svdda-supply = <&cam_io_reg>;
+            svddio-supply = <&ldo19_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
deleted file mode 100644
index cce01e82f3e3..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung S5K6A3(YX) raw image sensor
----------------------------------
-
-S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible	: "samsung,s5k6a3";
-- reg		: I2C slave address of the sensor;
-- svdda-supply	: core voltage supply;
-- svddio-supply	: I/O voltage supply;
-- afvdd-supply	: AF (actuator) voltage supply;
-- gpios		: specifier of a GPIO connected to the RESET pin;
-- clocks	: should contain list of phandle and clock specifier pairs
-		  according to common clock bindings for the clocks described
-		  in the clock-names property;
-- clock-names	: should contain "extclk" entry for the sensor's EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "extclk" clock should be
-		    configured to operate, in Hz; if this property is not
-		    specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The S5K6A3(YX) device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Following properties are valid for the endpoint node:
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-  video-interfaces.txt.  The sensor supports only one data lane.
-- 
2.34.1