[PATCH v2 0/5] Bluetooth: hci_mrvl: Add serdev support for 88W8997

[Francesco Dolcini]

On Fri, Feb 10, 2023 at 10:52:43AM -0800, Luiz Augusto von Dentz wrote:
> Hi Francesco,
> 
> On Fri, Feb 10, 2023 at 12:40 AM Francesco Dolcini <francesco at dolcini.it> wrote:
> >
> > Hello all,
> >
> > On Thu, Jan 26, 2023 at 08:43:51AM +0100, Francesco Dolcini wrote:
> > > From: Francesco Dolcini <francesco.dolcini at toradex.com>
> > >
> > > Add serdev support for the 88W8997 from NXP (previously Marvell). It includes
> > > support for changing the baud rate. The command to change the baud rate is
> > > taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth
> > > interfaces) from NXP.
> >
> > Just a gently ping on this series, patches 1,2 with DT binding changes
> > are reviewed/acked, patch 5 with the DTS change should just be on hold
> > till patches 1-4 are merged.
> >
> > No feedback on patches 4 (and 3), with the BT serdev driver code
> > changes, any plan on those?
> 
> bots have detected errors on these changes

>From what I can understand from this point of view v2 is fine, the error
was in v1, if I'm wrong just let me know.

Said that I'll do the change you asked regarding __hci_cmd_sync_status
and send a v3.

Thanks,
Francesco