[PATCH net-next 3/6] net: stmmac: start phylink before setting up hardware

[Russell King (Oracle)]

On Tue, Feb 07, 2023 at 03:41:35PM +0100, Clément Léger wrote:
> Le Mon, 16 Jan 2023 10:53:49 +0000,
> "Russell King (Oracle)" <linux at armlinux.org.uk> a écrit :
> 
> > On Mon, Jan 16, 2023 at 11:39:23AM +0100, Clément Léger wrote:
> > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > index f2247b8cf0a3..88c941003855 100644
> > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > @@ -3818,6 +3818,12 @@ static int __stmmac_open(struct net_device *dev,
> > >  		}
> > >  	}
> > >  
> > > +	/* We need to setup the phy & PCS before accessing the stmmac registers
> > > +	 * because in some cases (RZ/N1), if the stmmac IP is not clocked by the
> > > +	 * PCS, hardware init will fail because it lacks a RGMII RX clock.
> > > +	 */
> > > +	phylink_start(priv->phylink);  
> > 
> > So what happens if you end up with the mac_link_up method being called
> > at this point in the driver, before the hardware has been setup ?
> > 
> > If you use a fixed-link, that's a real possibility.
> 
> I actually have this setup. On the board, one GMAC is connected to a
> DSA switch using a fixed-link and the other using the PCS such as added
> by this series.
> 
> From what I see, indeed, the mac_link_up() function is called before
> stmmac_hw_setup(). This does not seems to have any effect on my setup
> (except making it working of course) but I agree this is clearly not
> ideal.
> 
> What I could do is adding a function in the miic pcs driver that could
> be called from my rzn1 stmmac probe function to actually configure the
> PCS at probe time based on the detected "phy-mode". Does that seems
> better to you ?

I think Clark Wang is also working on addressing a very similar problem
with stmmac. Please can you check out his work first, he's adding a new
function to phylink to bring the PHY up early in the resume path.

I would like you both to work together to address what seems to be the
same issue.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!