[PATCH v4 2/4] input: bbnsm_pwrkey: Add bbnsm power key support
Jacky Bai
ping.bai at nxp.com
Thu Feb 9 23:11:12 PST 2023
> Subject: Re: [PATCH v4 2/4] input: bbnsm_pwrkey: Add bbnsm power key
> support
>
> Hi Jacky,
>
> On Sun, Jan 29, 2023 at 03:08:21PM +0800, Jacky Bai wrote:
> > The ON/OFF logic inside the BBNSM allows for connecting directly into
> > a PMIC or other voltage regulator device. The module has an button
> > input signal and a wakeup request input signal. It also has two
> > interrupts (set_pwr_off_irq and set_pwr_on_irq) and an active-low PMIC
> > enable (pmic_en_b) output.
> >
> > Add the power key support for the ON/OFF button function found in
> > BBNSM module.
> >
> > Signed-off-by: Jacky Bai <ping.bai at nxp.com>
> > Reviewed-by: Peng Fan <peng.fan at nxp.com>
> > ---
> > - v2 changes:
> > - use device_property_read_u32() to read the property
> > - clean up the goto return, return directly
> > - sort the header file alphabetically
> > - rename the file to add 'nxp' prefix
> >
> > - v3 changes:
> > - get the regmap directly from the parent node
> >
> > - v4 changes:
> > - update the compatible string to align with binding file
> > - fix the device_property_read_u32 as stated in v2.
> > - add back the 'dev_warn' for 'dev_pm_set_wake_irq' return fail.
> > ---
> > drivers/input/keyboard/Kconfig | 11 ++
> > drivers/input/keyboard/Makefile | 1 +
> > drivers/input/keyboard/nxp-bbnsm-pwrkey.c | 192
> > ++++++++++++++++++++++
>
> Majority of pwrkey drivers reside in dribers/input/misc, which
> drivers/input/keyboard intended for more traditional/full keyboards.
> Could you please move this driver there?
>
Sure, I will move it into misc.
> We should move snvs_pwrkey too...
Will do it in a separate patch.
>
>
> > 3 files changed, 204 insertions(+)
> > create mode 100644 drivers/input/keyboard/nxp-bbnsm-pwrkey.c
> >
> > diff --git a/drivers/input/keyboard/Kconfig
> > b/drivers/input/keyboard/Kconfig index 84490915ae4d..43827e34f276
> > 100644
> > --- a/drivers/input/keyboard/Kconfig
> > +++ b/drivers/input/keyboard/Kconfig
> > @@ -456,6 +456,17 @@ config KEYBOARD_SNVS_PWRKEY
> > To compile this driver as a module, choose M here; the
> > module will be called snvs_pwrkey.
> >
> > +config KEYBOARD_BBNSM_PWRKEY
> > + tristate "NXP BBNSM Power Key Driver"
> > + depends on ARCH_MXC || COMPILE_TEST
> > + depends on OF
> > + help
> > + This is the bbnsm powerkey driver for the NXP i.MX application
> > + processors.
> > +
> > + To compile this driver as a module, choose M here; the
> > + module will be called bbnsm_pwrkey.
> > +
> > config KEYBOARD_IMX
> > tristate "IMX keypad support"
> > depends on ARCH_MXC || COMPILE_TEST
> > diff --git a/drivers/input/keyboard/Makefile
> > b/drivers/input/keyboard/Makefile index 5f67196bb2c1..e34dd65a34c3
> > 100644
> > --- a/drivers/input/keyboard/Makefile
> > +++ b/drivers/input/keyboard/Makefile
> > @@ -13,6 +13,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) +=
> amikbd.o
> > obj-$(CONFIG_KEYBOARD_APPLESPI) += applespi.o
> > obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
> > obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
> > +obj-$(CONFIG_KEYBOARD_BBNSM_PWRKEY) += nxp-bbnsm-pwrkey.o
> > obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o
> > obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o
> > obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o
> > diff --git a/drivers/input/keyboard/nxp-bbnsm-pwrkey.c
> > b/drivers/input/keyboard/nxp-bbnsm-pwrkey.c
> > new file mode 100644
> > index 000000000000..154ce58b9d5a
> > --- /dev/null
> > +++ b/drivers/input/keyboard/nxp-bbnsm-pwrkey.c
> > @@ -0,0 +1,192 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +//
> > +// Copyright 2022 NXP.
> > +
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/input.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_wakeirq.h>
> > +#include <linux/regmap.h>
> > +
> > +#define BBNSM_CTRL 0x8
> > +#define BBNSM_INT_EN 0x10
> > +#define BBNSM_EVENTS 0x14
> > +#define BBNSM_PAD_CTRL 0x24
> > +
> > +#define BBNSM_BTN_PRESSED BIT(7)
> > +#define BBNSM_PWR_ON BIT(6)
> > +#define BBNSM_BTN_OFF BIT(5)
> > +#define BBNSM_EMG_OFF BIT(4)
> > +#define BBNSM_PWRKEY_EVENTS (BBNSM_PWR_ON |
> BBNSM_BTN_OFF | BBNSM_EMG_OFF)
> > +#define BBNSM_DP_EN BIT(24)
> > +
> > +#define DEBOUNCE_TIME 30
> > +#define REPEAT_INTERVAL 60
> > +
> > +struct bbnsm_pwrkey {
> > + struct regmap *regmap;
> > + int irq;
> > + int keycode;
> > + int keystate; /* 1:pressed */
> > + struct timer_list check_timer;
> > + struct input_dev *input;
> > +};
> > +
> > +static void bbnsm_pwrkey_check_for_events(struct timer_list *t) {
> > + struct bbnsm_pwrkey *bbnsm = from_timer(bbnsm, t, check_timer);
> > + struct input_dev *input = bbnsm->input;
> > + u32 state;
> > +
> > + regmap_read(bbnsm->regmap, BBNSM_EVENTS, &state);
> > +
> > + state = state & BBNSM_BTN_PRESSED ? 1 : 0;
> > +
> > + /* only report new event if status changed */
> > + if (state ^ bbnsm->keystate) {
> > + bbnsm->keystate = state;
> > + input_event(input, EV_KEY, bbnsm->keycode, state);
> > + input_sync(input);
> > + pm_relax(bbnsm->input->dev.parent);
> > + }
> > +
> > + /* repeat check if pressed long */
> > + if (state) {
> > + mod_timer(&bbnsm->check_timer,
> > + jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
> > + }
> > +}
> > +
> > +static irqreturn_t bbnsm_pwrkey_interrupt(int irq, void *dev_id) {
> > + struct platform_device *pdev = dev_id;
> > + struct bbnsm_pwrkey *bbnsm = platform_get_drvdata(pdev);
> > + struct input_dev *input = bbnsm->input;
> > + u32 event;
> > +
> > + regmap_read(bbnsm->regmap, BBNSM_EVENTS, &event);
> > + if (event & BBNSM_BTN_OFF)
> > + mod_timer(&bbnsm->check_timer, jiffies +
> msecs_to_jiffies(DEBOUNCE_TIME));
> > + else
> > + return IRQ_NONE;
> > +
> > + pm_wakeup_event(input->dev.parent, 0);
> > +
> > + /* clear PWR OFF */
> > + regmap_write(bbnsm->regmap, BBNSM_EVENTS, BBNSM_BTN_OFF);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void bbnsm_pwrkey_act(void *pdata) {
> > + struct bbnsm_pwrkey *bbnsm = pdata;
> > +
> > + del_timer_sync(&bbnsm->check_timer);
>
> del_timer()/del_timer_sync() are deprecated. Please use
> timer_shutdown_sync() here.
Ok, will do it in V5.
>
> > +}
> > +
> > +static int bbnsm_pwrkey_probe(struct platform_device *pdev) {
> > + struct bbnsm_pwrkey *bbnsm;
> > + struct input_dev *input;
> > + struct device_node *np = pdev->dev.of_node;
> > + int error;
> > +
> > + bbnsm = devm_kzalloc(&pdev->dev, sizeof(*bbnsm), GFP_KERNEL);
> > + if (!bbnsm)
> > + return -ENOMEM;
> > +
> > + bbnsm->regmap = syscon_node_to_regmap(np->parent);
> > + if (IS_ERR(bbnsm->regmap)) {
> > + dev_err(&pdev->dev, "bbnsm pwerkey get regmap failed\n");
> > + return PTR_ERR(bbnsm->regmap);
> > + }
> > +
> > + if (device_property_read_u32(&pdev->dev, "linux,code",
> &bbnsm->keycode)) {
> > + bbnsm->keycode = KEY_POWER;
> > + dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
>
> This is a pretty cryptic message IMO. Maybe say "key code is not specified,
> using default KEY_POWER"?
Ok, will refine this log as you suggested.
>
> > + }
> > +
> > + bbnsm->irq = platform_get_irq(pdev, 0);
> > + if (bbnsm->irq < 0)
> > + return -EINVAL;
> > +
> > + /* config the BBNSM power related register */
> > + regmap_update_bits(bbnsm->regmap, BBNSM_CTRL, BBNSM_DP_EN,
> > +BBNSM_DP_EN);
> > +
> > + /* clear the unexpected interrupt before driver ready */
> > + regmap_write_bits(bbnsm->regmap, BBNSM_EVENTS,
> BBNSM_PWRKEY_EVENTS,
> > +BBNSM_PWRKEY_EVENTS);
> > +
> > + timer_setup(&bbnsm->check_timer, bbnsm_pwrkey_check_for_events,
> 0);
> > +
> > + input = devm_input_allocate_device(&pdev->dev);
> > + if (!input) {
> > + dev_err(&pdev->dev, "failed to allocate the input device\n");
> > + return -ENOMEM;
> > + }
> > +
> > + input->name = pdev->name;
> > + input->phys = "bbnsm-pwrkey/input0";
> > + input->id.bustype = BUS_HOST;
> > +
> > + input_set_capability(input, EV_KEY, bbnsm->keycode);
> > +
> > + /* input customer action to cancel release timer */
> > + error = devm_add_action(&pdev->dev, bbnsm_pwrkey_act, bbnsm);
> > + if (error) {
> > + dev_err(&pdev->dev, "failed to register remove action\n");
> > + return error;
> > + }
> > +
> > + bbnsm->input = input;
> > + platform_set_drvdata(pdev, bbnsm);
> > +
> > + error = devm_request_irq(&pdev->dev, bbnsm->irq,
> bbnsm_pwrkey_interrupt,
> > + IRQF_SHARED, pdev->name, pdev);
>
> Is this really a shared interrupt?
For current SoC integration, the ON/OFF power key IRQ signal are ORed together with RTC IRQ signal.
So these two functions share the same IRQ line to GIC. I think the IRQF_SHARED flag is necessary, right? ^_^
BR
>
> > + if (error) {
> > + dev_err(&pdev->dev, "interrupt not available.\n");
> > + return error;
> > + }
> > +
> > + error = input_register_device(input);
> > + if (error < 0) {
> > + dev_err(&pdev->dev, "failed to register input device\n");
> > + return error;
> > + }
> > +
> > + device_init_wakeup(&pdev->dev, true);
> > + error = dev_pm_set_wake_irq(&pdev->dev, bbnsm->irq);
> > + if (error)
> > + dev_warn(&pdev->dev, "irq wake enable failed.\n");
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id bbnsm_pwrkey_ids[] = {
> > + { .compatible = "nxp,imx93-bbnsm-pwrkey" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, bbnsm_pwrkey_ids);
> > +
> > +static struct platform_driver bbnsm_pwrkey_driver = {
> > + .driver = {
> > + .name = "bbnsm_pwrkey",
> > + .of_match_table = bbnsm_pwrkey_ids,
> > + },
> > + .probe = bbnsm_pwrkey_probe,
> > +};
> > +module_platform_driver(bbnsm_pwrkey_driver);
> > +
> > +MODULE_AUTHOR("Jacky Bai <ping.bai at nxp.com>");
> > +MODULE_DESCRIPTION("NXP bbnsm power key Driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.37.1
> >
>
> Thanks.
>
> --
> Dmitry
More information about the linux-arm-kernel
mailing list