[PATCH v3 5/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards

[Uwe Kleine-König]

Hello,

On Fri, Jan 27, 2023 at 05:40:39PM +0100, Gatien Chevallier wrote:
> The STM32 System Bus is an internal bus on which devices are connected.
> ETZPC is a peripheral overseeing the firewall bus that configures
> and control access to the peripherals connected on it.
> 
> For more information on which peripheral is securable, please read
> the STM32MP15 reference manual.

it might be naive, but I somehow expected that when showing at the
resulting commit with git show -b that the patch gets quite small.

Is it really intended that &etzpc (which has reg = <0x5c007000 0x400>;)
is the parent bus of the devices with feature-domains = <&etzpc XX>; even
though their addresses are out of &etzpc's range? Doesn't a bus usually
have a ranges property and a base address that matches its contained
devices?

Looking at imx6qdl.dtsi there is:

	aips1: bus at 2000000 { /* AIPS1 */
		...
		reg = <0x02000000 0x100000>;
		ranges;

		spba-bus at 2000000 {
			...
			reg = <0x02000000 0x40000>;
			...
		};

		...

		sdma: dma-controller at 20ec000 {
			...
			reg = <0x020ec000 0x4000>;
			...
		};
	};

and the registers configuring the aips1 bus are (I think) in

                        aipstz at 207c000 { /* AIPSTZ1 */
                                reg = <0x0207c000 0x4000>;
                        };

Maybe this change could be made less intrusive by using a similar setup
here?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230209/c2396087/attachment.sig>