[RFT PATCH 1/3] ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas

[Krzysztof Kozlowski]

The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.

While touching the lines, replace open-coded GPIO_ACTIVE_HIGH flag.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/exynos4412-midas.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index d5074fa57142..525f945c4b91 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -653,8 +653,8 @@ wm1811: audio-codec at 1a {
 		CPVDD-supply = <&vbatt_reg>;
 		SPKVDD1-supply = <&vbatt_reg>;
 		SPKVDD2-supply = <&vbatt_reg>;
-		wlf,ldo1ena = <&gpj0 4 0>;
-		wlf,ldo2ena = <&gpj0 4 0>;
+		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
2.34.1