[PATCH] riscv: dts: nezha-d1: add gpio-line-names

[Conor Dooley]

Hey Trevor,

On Tue, Feb 07, 2023 at 08:45:03PM -0500, Trevor Woerner wrote:
> Add descriptive names so users can associate specific lines with their
> respective pins on the 40-pin header according to the schematics found at:
> 
> 	http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf

Dunno about the sunxi folk, but ideally that'd be a Link: tag IMO.

> 
> Signed-off-by: Trevor Woerner <twoerner at gmail.com>
> ---
>  .../boot/dts/allwinner/sun20i-d1-nezha.dts    | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> index a0769185be97..33489c7619cb 100644
> --- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> @@ -90,6 +90,15 @@ pcf8574a: gpio at 38 {
>  		gpio-controller;
>  		#gpio-cells = <2>;
>  		#interrupt-cells = <2>;
> +		gpio-line-names =
> +			"pin13 [PP0,gpio8] ",
> +			"pin16 [PP1,gpio10]",
> +			"pin18 [PP2,gpio11]",
> +			"pin26 [PP3,gpio17]",
> +			"pin22 [PP4,gpio14]",
> +			"pin28 [PP5,gpio19]",
> +			"pin37 [PP6,gpio23]",
> +			"pin11 [PP7,gpio6] ";

dtbs_check does not like this:
arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dtb: gpio at 38: 'gpio-line-names' does not match any of the regexes: '^(.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml

>  	};
>  };
>  
> @@ -164,3 +173,47 @@ &usbphy {
>  	usb1_vbus-supply = <&reg_vcc>;
>  	status = "okay";
>  };
> +
> +&pio {
> +	gpio-line-names =
> +		/* Port A */
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		/* Port B */
> +		"pin5  [PB0, gpio2/twi2-sck]",
> +		"pin3  [PB1, gpio1/twi2-sda]",
> +		"",
> +		"pin38 [PB3, gpio24/i2s2-din]",
> +		"pin40 [PB4, gpio25/i2s2-dout]",
> +		"pin12 [PB5, gpio7/i2s-clk]",
> +		"pin35 [PB6, gpio22/i2s2-lrck]",
> +		"",
> +		"pin8  [PB8, gpio4/uart0-txd]",
> +		"pin10 [PB9, gpio5/uart0-rxd]",
> +		"",
> +		"",
> +		"pin15 [PB12,gpio9]",

Why not pick a consistent styling w.r.t. the space between PB#, & gpio?

Cheers,
Conor.

> +		"", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		/* Port C */
> +		"",
> +		"pin31 [PC1, gpio21]",
> +		"", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		/* Port D */
> +		"", "", "", "", "", "", "", "",
> +		"", "",
> +		"pin24 [PD10,gpio16/spi1-ce0]",
> +		"pin23 [PD11,gpio15/spi1-clk]",
> +		"pin19 [PD12,gpio12/spi1-mosi]",
> +		"pin21 [PD13,gpio13/spi1-miso]",
> +		"pin27 [PD14,gpio18/spi1-hold]",
> +		"pin29 [PD15,gpio20/spi1-wp]",
> +		"", "", "", "", "", "",
> +		"pin7  [PD22,gpio3/pwm]";
> +};
> -- 
> 2.36.0.rc2.17.g4027e30c53
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230208/8ca651e4/attachment.sig>