[PATCH V4 1/7] clk: qcom: Add STROMER PLUS PLL type for IPQ5332

[Kathiravan T]

Add the support for stromer plus pll, which is found on the IPQ5332
SoCs. Programming sequence is same as the stromer pll, so we can re-use
the same.

Reviewed-by: Stephen Boyd <sboyd at kernel.org>
Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
---
Changes in V4:
	- No changes

Changes in V3:
	- No changes

Changes in V2:
	- Added the Reviewed-by tag

 drivers/clk/qcom/clk-alpha-pll.c | 11 +++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |  1 +
 2 files changed, 12 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 14f9436b62fc..b9f6535a7ba7 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -216,6 +216,17 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_TEST_CTL_U] = 0x34,
 		[PLL_OFF_STATUS] = 0x28,
 	},
+	[CLK_ALPHA_PLL_TYPE_STROMER_PLUS] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_USER_CTL] = 0x08,
+		[PLL_OFF_USER_CTL_U] = 0x0c,
+		[PLL_OFF_CONFIG_CTL] = 0x10,
+		[PLL_OFF_TEST_CTL] = 0x14,
+		[PLL_OFF_TEST_CTL_U] = 0x18,
+		[PLL_OFF_STATUS] = 0x1c,
+		[PLL_OFF_ALPHA_VAL] = 0x24,
+		[PLL_OFF_ALPHA_VAL_U] = 0x28,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index ff25c7f7b43e..d07b17186b90 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -27,6 +27,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
 	CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
 	CLK_ALPHA_PLL_TYPE_STROMER,
+	CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
-- 
2.17.1