[PATCH v2 07/10] iommu/mediatek: Add a gap for the iova regions

[Yong Wu]

As the removed property in the vcodec dt-binding, the property is:
dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;

The length is 0xfff0_0000 rather than 0x1_0000_0000, this means it
requires 1M as a gap. This is because the end address for some vcodec
HW is (address + size). If the size is 4G, the end address may be
0x2_0000_0000, and the width for vcodec register only is 32, then the
HW may get the ZERO address.

Currently the consumer's dma-ranges property doesn't work, IOMMU
have to consider this problem. Add a bigger gap(8M) for all the regions
to avoid it.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7e8fd0a0536c..2e8ffcec35d9 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -304,15 +304,15 @@ static LIST_HEAD(m4ulist);	/* List all the M4U HWs */
 #define for_each_m4u(data, head)  list_for_each_entry(data, head, list)
 
 static const struct mtk_iommu_iova_region single_domain[] = {
-	{.iova_base = 0,		.size = SZ_4G},
+	{.iova_base = 0,		.size = SZ_4G - SZ_8M},
 };
 
 static const struct mtk_iommu_iova_region mt8192_multi_dom[] = {
-	{ .iova_base = 0x0,		.size = SZ_4G},		/* 0 ~ 4G */
+	{ .iova_base = 0x0,		.size = SZ_4G - SZ_8M},	/* 0 ~ 4G, 8M as a gap. */
 	#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
-	{ .iova_base = SZ_4G,		.size = SZ_4G},		/* 4G ~ 8G */
-	{ .iova_base = SZ_4G * 2,	.size = SZ_4G},		/* 8G ~ 12G */
-	{ .iova_base = SZ_4G * 3,	.size = SZ_4G},		/* 12G ~ 16G */
+	{ .iova_base = SZ_4G,		.size = SZ_4G - SZ_8M},	/* 4G ~ 8G */
+	{ .iova_base = SZ_4G * 2,	.size = SZ_4G - SZ_8M},	/* 8G ~ 12G */
+	{ .iova_base = SZ_4G * 3,	.size = SZ_4G - SZ_8M},	/* 12G ~ 16G */
 
 	{ .iova_base = 0x240000000ULL,	.size = 0x4000000},	/* CCU0 */
 	{ .iova_base = 0x244000000ULL,	.size = 0x4000000},	/* CCU1 */
-- 
2.18.0