[PATCH 3/4] arm64: dts: qcom: sc8280xp-x13s: Enable external display

[Bjorn Andersson]

Like on the CRD, add the necessary nodes to enable USB Type-C
altmode-based external display on the Lenovo ThinkPad X13s.

Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 191 +++++++++++++++++-
 1 file changed, 189 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 9f1456fde932..4ef15edd6c0f 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -77,6 +77,77 @@ switch-lid {
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector at 0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port at 0 {
+					reg = <0>;
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port at 2 {
+					reg = <2>;
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector at 1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port at 0 {
+					reg = <0>;
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port at 2 {
+					reg = <2>;
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -238,6 +309,46 @@ map1 {
 			};
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -377,6 +488,36 @@ &mdss0 {
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+
+	data-lanes = <0 1>;
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss0_dp0_out: endpoint {
+				remote-endpoint = <&pmic_glink_con0_ss>;
+			};
+		};
+	};
+};
+
+&mdss0_dp1 {
+	status = "okay";
+
+	data-lanes = <0 1>;
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss0_dp1_out: endpoint {
+				remote-endpoint = <&pmic_glink_con1_ss>;
+			};
+		};
+	};
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 
@@ -871,8 +1012,13 @@ &usb_0 {
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
+
+	port {
+		usb_0_role_switch: endpoint {
+			remote-endpoint = <&pmic_glink_con0_hs>;
+		};
+	};
 };
 
 &usb_0_hsphy {
@@ -895,8 +1041,13 @@ &usb_1 {
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
+
+	port {
+		usb_1_role_switch: endpoint {
+			remote-endpoint = <&pmic_glink_con1_hs>;
+		};
+	};
 };
 
 &usb_1_hsphy {
@@ -1147,6 +1298,42 @@ reset-n-pins {
 		};
 	};
 
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+		};
+
+		mode-pins {
+			pins = "gpio167";
+			function = "gpio";
+			output-high;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+		};
+
+		mode-pins {
+			pins = "gpio50";
+			function = "gpio";
+			output-high;
+		};
+	};
+
 	wcd_default: wcd-default-state {
 		reset-pins {
 			pins = "gpio106";
-- 
2.39.1