[PATCH 1/8] arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name

[Neil Armstrong]

Fixes the following bindings check error:
usb-hub: $nodename:0: 'usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index bb492581f1b7..e1683e0630b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -316,7 +316,7 @@ &gpio {
 	 * be handled by a USB specific power sequence to reset the Hub
 	 * when the USB bus is powered down.
 	 */
-	usb-hub {
+	usb-hub-hog {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;

-- 
2.34.1