[PATCH V3 5/9] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC

[Kathiravan T]

Thanks Dmirty for the review!


On 2/6/2023 3:26 PM, Dmitry Baryshkov wrote:
> On 06/02/2023 09:12, Kathiravan T wrote:
> > Add support for the global clock controller found on IPQ5332 SoC.
> >
> > Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > ---
> > Changes in V3:
> >     - As I mentined the bindings, changes need to be done in V2 got
> >       missed out and same has been done in V3, to call out
> >       specifically dropped the CLK_IS_CRITICAL and dropped the
> >       gcc_apss_ahb_clk, its source clock and gcc_apss_axi_clk
> >     - Used gcc_parent_data_xo wherever applicable and dropped the
> >       duplicate entries
> >     - dropped the unused parent_map_10 and parent_data_10
> >     - Used qcom_cc_probe instead of qcom_cc_really_probe
> > Changes in V2:
> >     - Added the 'dependes on' for Kconfig symbol
> >     - Dropped the CLK_IS_CRITICAL flag throughout the file
> >     - Dropped the gcc_apss_ahb_clk and gcc_apss_axi_clk as these are
> >       managed by bootloaders
>
>
> [skipped]
>
> > +static const struct freq_tbl ftbl_gcc_pcie_aux_clk_src[] = {
> > +    F(2000000, P_XO, 12, 0, 0),
> > +    { }
> > +};
> > +
> > +static struct clk_rcg2 gcc_pcie_aux_clk_src = {
> > +    .cmd_rcgr = 0x28004,
> > +    .mnd_width = 16,
> > +    .hid_width = 5,
> > +    .parent_map = gcc_parent_map_6,
> > +    .freq_tbl = ftbl_gcc_pcie_aux_clk_src,
> > +    .clkr.hw.init = &(const struct clk_init_data){
> > +        .name = "gcc_pcie_aux_clk_src",
> > +        .parent_data = gcc_parent_data_6,
> > +        .num_parents = ARRAY_SIZE(gcc_parent_data_6),
> > +        .ops = &clk_rcg2_ops,
> > +    },
> > +};
> > +
> > +static struct clk_regmap_mux pcie3x2_pipe_clk_src = {
> > +    .reg = 0x28064,
> > +    .shift = 8,
> > +    .width = 2,
> > +    .parent_map = gcc_parent_map_14,
> > +    .clkr = {
> > +        .hw.init = &(struct clk_init_data){
> > +            .name = "pcie3x2_phy_pipe_clk_src",
> > +            .parent_data = gcc_parent_data_14,
> > +            .num_parents = ARRAY_SIZE(gcc_parent_data_14),
> > +            .ops = &clk_regmap_mux_closest_ops,
>
> Should we use clk_regmap_phy_mux_ops here instead?


Sure, I will check this one. Also looking at the commit, 74e4190cdebe 
("clk: qcom: regmap: add PHY clock source implementation"), looks like I 
can use the clk_regmap_phy_mux struct instead of clk_regmap_mux. I will 
check into this and update accordingly.


>
> > +            .flags = CLK_SET_RATE_PARENT,
> > +        },
> > +    },
> > +};
> > +
> > +static struct clk_regmap_mux pcie3x1_0_pipe_clk_src = {
> > +    .reg = 0x29064,
> > +    .shift = 8,
> > +    .width = 2,
> > +    .parent_map = gcc_parent_map_15,
> > +    .clkr = {
> > +        .hw.init = &(struct clk_init_data){
> > +            .name = "pcie3x1_0_phy_pipe_clk_src",
> > +            .parent_data = gcc_parent_data_15,
> > +            .num_parents = ARRAY_SIZE(gcc_parent_data_15),
> > +            .ops = &clk_regmap_mux_closest_ops,
>
> And clk_regmap_phy_mux_ops here too?


Ack.


>
> > +            .flags = CLK_SET_RATE_PARENT,
> > +        },
> > +    },
> > +};
> > +
> > +static struct clk_regmap_mux pcie3x1_1_pipe_clk_src = {
> > +    .reg = 0x2A064,
> > +    .shift = 8,
> > +    .width = 2,
> > +    .parent_map = gcc_parent_map_16,
> > +    .clkr = {
> > +        .hw.init = &(struct clk_init_data){
> > +            .name = "pcie3x1_1_phy_pipe_clk_src",
> > +            .parent_data = gcc_parent_data_16,
> > +            .num_parents = ARRAY_SIZE(gcc_parent_data_16),
> > +            .ops = &clk_regmap_mux_closest_ops,
>
> And here?


Ack.


>
> > +            .flags = CLK_SET_RATE_PARENT,
> > +        },
> > +    },
> > +};
> > +
>
> [skipped]
>
>
> > +
> > +static struct clk_branch gcc_pcie3x1_0_pipe_clk = {
> > +    .halt_reg = 0x29068,
> > +    .halt_check = BRANCH_HALT_DELAY,
> > +    .clkr = {
> > +        .enable_reg = 0x29068,
> > +        .enable_mask = BIT(0),
> > +        .hw.init = &(const struct clk_init_data){
> > +            .name = "gcc_pcie3x1_0_pipe_clk",
> > +            .parent_names = (const char *[]){
> > +                "pcie3x1_0_pipe_clk_src"
> > +            },
>
> Nooo. No parent_names please. You have several of them in the driver


I missed this. I will fix in next spin.


>
> > +            .num_parents = 1,
> > +            .flags = CLK_SET_RATE_PARENT,
> > +            .ops = &clk_branch2_ops,
> > +        },
> > +    },
> > +};
> > +
>