[PATCH V3 5/9] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC

[Bjorn Andersson]

On Mon, Feb 06, 2023 at 12:42:13PM +0530, Kathiravan T wrote:
> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
[..]
> +
> +enum {
> +	DT_SLEEP_CLK,
> +	DT_XO,
> +	DT_PCIE_2LANE_PHY_PIPE_CLK,
> +	DT_PCIE_2LANE_PHY_PIPE_X1_CLK,
> +	DT_USB_PCIE_WRAPPER_PIPE_CLK,

This list does not match the clocks as defined in the binding.

> +};
> +
> +enum {
> +	P_PCIE3X2_PIPE,
> +	P_PCIE3X1_0_PIPE,
> +	P_PCIE3X1_1_PIPE,
> +	P_USB3PHY_0_PIPE,
> +	P_CORE_BI_PLL_TEST_SE,
> +	P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC,
> +	P_GPLL0_OUT_AUX,
> +	P_GPLL0_OUT_MAIN,
> +	P_GPLL2_OUT_AUX,
> +	P_GPLL2_OUT_MAIN,
> +	P_GPLL4_OUT_AUX,
> +	P_GPLL4_OUT_MAIN,
> +	P_SLEEP_CLK,
> +	P_XO,
> +};
> +
> +static const struct clk_parent_data gcc_parent_data_xo = { .index = DT_XO };
> +
> +static struct clk_alpha_pll gpll0_main = {
> +	.offset = 0x20000,
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
> +	.clkr = {
> +		.enable_reg = 0xb000,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(const struct clk_init_data){

Please add a space between ')' and '{ on all these.

> +			.name = "gpll0_main",
> +			.parent_data = &gcc_parent_data_xo,
> +			.num_parents = 1,
> +			.ops = &clk_alpha_pll_stromer_ops,
> +		},
> +	},
> +};
[..]
> +static const struct qcom_cc_desc gcc_ipq5332_desc = {
> +	.config = &gcc_ipq5332_regmap_config,
> +	.clks = gcc_ipq5332_clocks,
> +	.num_clks = ARRAY_SIZE(gcc_ipq5332_clocks),
> +	.resets = gcc_ipq5332_resets,
> +	.num_resets = ARRAY_SIZE(gcc_ipq5332_resets),
> +	.clk_hws = gcc_ipq5332_hws,
> +	.num_clk_hws = ARRAY_SIZE(gcc_ipq5332_hws),

No GDSCs?

Regards,
Bjorn