[PATCH 1/8] ARM: dts: uniphier: Align node names for SoC-dependent controller and PHYs with bindings
Kunihiko Hayashi
hayashi.kunihiko at socionext.com
Mon Feb 6 18:35:07 PST 2023
The node names for SoC-dependent controllers and PHYs should be
generic ones according to the DT schemas.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
arch/arm/boot/dts/uniphier-ld4.dtsi | 22 +++++++--------
arch/arm/boot/dts/uniphier-pro4.dtsi | 36 ++++++++++++------------
arch/arm/boot/dts/uniphier-pro5.dtsi | 36 ++++++++++++------------
arch/arm/boot/dts/uniphier-pxs2.dtsi | 42 ++++++++++++++--------------
arch/arm/boot/dts/uniphier-sld8.dtsi | 22 +++++++--------
5 files changed, 79 insertions(+), 79 deletions(-)
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 9dceff12a633..06b9571345a2 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -207,33 +207,33 @@ smpctrl at 59801000 {
reg = <0x59801000 0x400>;
};
- mioctrl at 59810000 {
+ syscon at 59810000 {
compatible = "socionext,uniphier-ld4-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- mio_clk: clock {
+ mio_clk: clock-controller {
compatible = "socionext,uniphier-ld4-mio-clock";
#clock-cells = <1>;
};
- mio_rst: reset {
+ mio_rst: reset-controller {
compatible = "socionext,uniphier-ld4-mio-reset";
#reset-cells = <1>;
};
};
- perictrl at 59820000 {
+ syscon at 59820000 {
compatible = "socionext,uniphier-ld4-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-ld4-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-ld4-peri-reset";
#reset-cells = <1>;
};
@@ -334,7 +334,7 @@ usb2: usb at 5a820100 {
has-transaction-translator;
};
- soc-glue at 5f800000 {
+ syscon at 5f800000 {
compatible = "socionext,uniphier-ld4-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -344,7 +344,7 @@ pinctrl: pinctrl {
};
};
- soc-glue at 5f900000 {
+ syscon at 5f900000 {
compatible = "socionext,uniphier-ld4-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -393,17 +393,17 @@ aidet: interrupt-controller at 61830000 {
#interrupt-cells = <2>;
};
- sysctrl at 61840000 {
+ syscon at 61840000 {
compatible = "socionext,uniphier-ld4-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-ld4-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-ld4-reset";
#reset-cells = <1>;
};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index a309e64c57c8..064f98b61525 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -241,33 +241,33 @@ smpctrl at 59801000 {
reg = <0x59801000 0x400>;
};
- mioctrl at 59810000 {
+ syscon at 59810000 {
compatible = "socionext,uniphier-pro4-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- mio_clk: clock {
+ mio_clk: clock-controller {
compatible = "socionext,uniphier-pro4-mio-clock";
#clock-cells = <1>;
};
- mio_rst: reset {
+ mio_rst: reset-controller {
compatible = "socionext,uniphier-pro4-mio-reset";
#reset-cells = <1>;
};
};
- perictrl at 59820000 {
+ syscon at 59820000 {
compatible = "socionext,uniphier-pro4-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-pro4-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-pro4-peri-reset";
#reset-cells = <1>;
};
@@ -375,7 +375,7 @@ usb3: usb at 5a810100 {
has-transaction-translator;
};
- soc_glue: soc-glue at 5f800000 {
+ soc_glue: syscon at 5f800000 {
compatible = "socionext,uniphier-pro4-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -384,7 +384,7 @@ pinctrl: pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
- usb-controller {
+ usb-hub {
compatible = "socionext,uniphier-pro4-usb2-phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -412,13 +412,13 @@ usb_phy3: phy at 3 {
};
};
- sg_clk: clock {
+ sg_clk: clock-controller {
compatible = "socionext,uniphier-pro4-sg-clock";
#clock-cells = <1>;
};
};
- soc-glue at 5f900000 {
+ syscon at 5f900000 {
compatible = "socionext,uniphier-pro4-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -480,17 +480,17 @@ intc: interrupt-controller at 60001000 {
interrupt-controller;
};
- sysctrl at 61840000 {
+ syscon at 61840000 {
compatible = "socionext,uniphier-pro4-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-pro4-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-pro4-reset";
#reset-cells = <1>;
};
@@ -549,7 +549,7 @@ ahci0_rst: reset-controller at 0 {
#reset-cells = <1>;
};
- ahci0_phy: sata-phy at 10 {
+ ahci0_phy: phy at 10 {
compatible = "socionext,uniphier-pro4-ahci-phy";
reg = <0x10 0x40>;
clock-names = "link", "gio";
@@ -595,7 +595,7 @@ ahci1_rst: reset-controller at 0 {
#reset-cells = <1>;
};
- ahci1_phy: sata-phy at 10 {
+ ahci1_phy: phy at 10 {
compatible = "socionext,uniphier-pro4-ahci-phy";
reg = <0x10 0x40>;
clock-names = "link", "gio";
@@ -642,7 +642,7 @@ usb0_vbus: regulator at 0 {
resets = <&sys_rst 12>, <&sys_rst 14>;
};
- usb0_ssphy: ss-phy at 10 {
+ usb0_ssphy: phy at 10 {
compatible = "socionext,uniphier-pro4-usb3-ssphy";
reg = <0x10 0x10>;
#phy-cells = <0>;
@@ -653,7 +653,7 @@ usb0_ssphy: ss-phy at 10 {
vbus-supply = <&usb0_vbus>;
};
- usb0_rst: reset at 40 {
+ usb0_rst: reset-controller at 40 {
compatible = "socionext,uniphier-pro4-usb3-reset";
reg = <0x40 0x4>;
#reset-cells = <1>;
@@ -696,7 +696,7 @@ usb1_vbus: regulator at 0 {
resets = <&sys_rst 12>, <&sys_rst 15>;
};
- usb1_rst: reset at 40 {
+ usb1_rst: reset-controller at 40 {
compatible = "socionext,uniphier-pro4-usb3-reset";
reg = <0x40 0x4>;
#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 100edd7438d8..2af4fa19bf14 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -341,39 +341,39 @@ smpctrl at 59801000 {
reg = <0x59801000 0x400>;
};
- sdctrl at 59810000 {
+ syscon at 59810000 {
compatible = "socionext,uniphier-pro5-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_clk: clock {
+ sd_clk: clock-controller {
compatible = "socionext,uniphier-pro5-sd-clock";
#clock-cells = <1>;
};
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-pro5-sd-reset";
#reset-cells = <1>;
};
};
- perictrl at 59820000 {
+ syscon at 59820000 {
compatible = "socionext,uniphier-pro5-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-pro5-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-pro5-peri-reset";
#reset-cells = <1>;
};
};
- soc-glue at 5f800000 {
+ syscon at 5f800000 {
compatible = "socionext,uniphier-pro5-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -383,7 +383,7 @@ pinctrl: pinctrl {
};
};
- soc-glue at 5f900000 {
+ syscon at 5f900000 {
compatible = "socionext,uniphier-pro5-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -455,17 +455,17 @@ intc: interrupt-controller at 60001000 {
interrupt-controller;
};
- sysctrl at 61840000 {
+ syscon at 61840000 {
compatible = "socionext,uniphier-pro5-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-pro5-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-pro5-reset";
#reset-cells = <1>;
};
@@ -493,7 +493,7 @@ usb-controller at 65b00000 {
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
- usb0_rst: reset at 0 {
+ usb0_rst: reset-controller at 0 {
compatible = "socionext,uniphier-pro5-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -512,7 +512,7 @@ usb0_vbus0: regulator at 100 {
resets = <&sys_rst 12>, <&sys_rst 14>;
};
- usb0_hsphy0: hs-phy at 280 {
+ usb0_hsphy0: phy at 280 {
compatible = "socionext,uniphier-pro5-usb3-hsphy";
reg = <0x280 0x10>;
#phy-cells = <0>;
@@ -523,7 +523,7 @@ usb0_hsphy0: hs-phy at 280 {
vbus-supply = <&usb0_vbus0>;
};
- usb0_ssphy0: ss-phy at 380 {
+ usb0_ssphy0: phy at 380 {
compatible = "socionext,uniphier-pro5-usb3-ssphy";
reg = <0x380 0x10>;
#phy-cells = <0>;
@@ -557,7 +557,7 @@ usb-controller at 65d00000 {
#size-cells = <1>;
ranges = <0 0x65d00000 0x400>;
- usb1_rst: reset at 0 {
+ usb1_rst: reset-controller at 0 {
compatible = "socionext,uniphier-pro5-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -585,7 +585,7 @@ usb1_vbus1: regulator at 110 {
resets = <&sys_rst 12>, <&sys_rst 15>;
};
- usb1_hsphy0: hs-phy at 280 {
+ usb1_hsphy0: phy at 280 {
compatible = "socionext,uniphier-pro5-usb3-hsphy";
reg = <0x280 0x10>;
#phy-cells = <0>;
@@ -596,7 +596,7 @@ usb1_hsphy0: hs-phy at 280 {
vbus-supply = <&usb1_vbus0>;
};
- usb1_hsphy1: hs-phy at 290 {
+ usb1_hsphy1: phy at 290 {
compatible = "socionext,uniphier-pro5-usb3-hsphy";
reg = <0x290 0x10>;
#phy-cells = <0>;
@@ -607,7 +607,7 @@ usb1_hsphy1: hs-phy at 290 {
vbus-supply = <&usb1_vbus1>;
};
- usb1_ssphy0: ss-phy at 380 {
+ usb1_ssphy0: phy at 380 {
compatible = "socionext,uniphier-pro5-usb3-ssphy";
reg = <0x380 0x10>;
#phy-cells = <0>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index ca4dccf56a67..050e9b7c83f1 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -422,33 +422,33 @@ smpctrl at 59801000 {
reg = <0x59801000 0x400>;
};
- sdctrl at 59810000 {
+ syscon at 59810000 {
compatible = "socionext,uniphier-pxs2-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_clk: clock {
+ sd_clk: clock-controller {
compatible = "socionext,uniphier-pxs2-sd-clock";
#clock-cells = <1>;
};
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-pxs2-sd-reset";
#reset-cells = <1>;
};
};
- perictrl at 59820000 {
+ syscon at 59820000 {
compatible = "socionext,uniphier-pxs2-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-pxs2-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-pxs2-peri-reset";
#reset-cells = <1>;
};
@@ -488,7 +488,7 @@ sd: mmc at 5a400000 {
sd-uhs-sdr50;
};
- soc_glue: soc-glue at 5f800000 {
+ soc_glue: syscon at 5f800000 {
compatible = "socionext,uniphier-pxs2-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -498,7 +498,7 @@ pinctrl: pinctrl {
};
};
- soc-glue at 5f900000 {
+ syscon at 5f900000 {
compatible = "socionext,uniphier-pxs2-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -555,17 +555,17 @@ intc: interrupt-controller at 60001000 {
interrupt-controller;
};
- sysctrl at 61840000 {
+ syscon at 61840000 {
compatible = "socionext,uniphier-pxs2-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-pxs2-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
@@ -628,7 +628,7 @@ ahci_rst: reset-controller at 0 {
#reset-cells = <1>;
};
- ahci_phy: sata-phy at 10 {
+ ahci_phy: phy at 10 {
compatible = "socionext,uniphier-pxs2-ahci-phy";
reg = <0x10 0x10>;
clock-names = "link";
@@ -662,7 +662,7 @@ usb-controller at 65b00000 {
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
- usb0_rst: reset at 0 {
+ usb0_rst: reset-controller at 0 {
compatible = "socionext,uniphier-pxs2-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -690,7 +690,7 @@ usb0_vbus1: regulator at 110 {
resets = <&sys_rst 14>;
};
- usb0_hsphy0: hs-phy at 200 {
+ usb0_hsphy0: phy at 200 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -701,7 +701,7 @@ usb0_hsphy0: hs-phy at 200 {
vbus-supply = <&usb0_vbus0>;
};
- usb0_hsphy1: hs-phy at 210 {
+ usb0_hsphy1: phy at 210 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -712,7 +712,7 @@ usb0_hsphy1: hs-phy at 210 {
vbus-supply = <&usb0_vbus1>;
};
- usb0_ssphy0: ss-phy at 300 {
+ usb0_ssphy0: phy at 300 {
compatible = "socionext,uniphier-pxs2-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
@@ -723,7 +723,7 @@ usb0_ssphy0: ss-phy at 300 {
vbus-supply = <&usb0_vbus0>;
};
- usb0_ssphy1: ss-phy at 310 {
+ usb0_ssphy1: phy at 310 {
compatible = "socionext,uniphier-pxs2-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
@@ -757,7 +757,7 @@ usb-controller at 65d00000 {
#size-cells = <1>;
ranges = <0 0x65d00000 0x400>;
- usb1_rst: reset at 0 {
+ usb1_rst: reset-controller at 0 {
compatible = "socionext,uniphier-pxs2-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -785,7 +785,7 @@ usb1_vbus1: regulator at 110 {
resets = <&sys_rst 15>;
};
- usb1_hsphy0: hs-phy at 200 {
+ usb1_hsphy0: phy at 200 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -796,7 +796,7 @@ usb1_hsphy0: hs-phy at 200 {
vbus-supply = <&usb1_vbus0>;
};
- usb1_hsphy1: hs-phy at 210 {
+ usb1_hsphy1: phy at 210 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -807,7 +807,7 @@ usb1_hsphy1: hs-phy at 210 {
vbus-supply = <&usb1_vbus1>;
};
- usb1_ssphy0: ss-phy at 300 {
+ usb1_ssphy0: phy at 300 {
compatible = "socionext,uniphier-pxs2-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 67b12dfe513b..b4453f9fe981 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -211,33 +211,33 @@ smpctrl at 59801000 {
reg = <0x59801000 0x400>;
};
- mioctrl at 59810000 {
+ syscon at 59810000 {
compatible = "socionext,uniphier-sld8-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- mio_clk: clock {
+ mio_clk: clock-controller {
compatible = "socionext,uniphier-sld8-mio-clock";
#clock-cells = <1>;
};
- mio_rst: reset {
+ mio_rst: reset-controller {
compatible = "socionext,uniphier-sld8-mio-reset";
#reset-cells = <1>;
};
};
- perictrl at 59820000 {
+ syscon at 59820000 {
compatible = "socionext,uniphier-sld8-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-sld8-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-sld8-peri-reset";
#reset-cells = <1>;
};
@@ -338,7 +338,7 @@ usb2: usb at 5a820100 {
has-transaction-translator;
};
- soc-glue at 5f800000 {
+ syscon at 5f800000 {
compatible = "socionext,uniphier-sld8-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -348,7 +348,7 @@ pinctrl: pinctrl {
};
};
- soc-glue at 5f900000 {
+ syscon at 5f900000 {
compatible = "socionext,uniphier-sld8-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -397,17 +397,17 @@ aidet: interrupt-controller at 61830000 {
#interrupt-cells = <2>;
};
- sysctrl at 61840000 {
+ syscon at 61840000 {
compatible = "socionext,uniphier-sld8-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-sld8-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-sld8-reset";
#reset-cells = <1>;
};
--
2.25.1
More information about the linux-arm-kernel
mailing list