[PATCH v2 00/11] fw_devlink improvements

[Saravana Kannan]

On Mon, Feb 6, 2023 at 7:19 AM Rob Herring <robh+dt at kernel.org> wrote:
>
> On Sun, Feb 5, 2023 at 7:33 PM Saravana Kannan <saravanak at google.com> wrote:
> >
> > On Fri, Feb 3, 2023 at 1:39 AM Maxim Kiselev <bigunclemax at gmail.com> wrote:
> > >
> > > пт, 3 февр. 2023 г. в 09:07, Saravana Kannan <saravanak at google.com>:
> > > >
> > > > On Thu, Feb 2, 2023 at 9:36 AM Maxim Kiselev <bigunclemax at gmail.com> wrote:
> > > > >
> > > > > Hi Saravana,
> > > > >
> > > > > > Can you try the patch at the end of this email under these
> > > > > > configurations and tell me which ones fail vs pass? I don't need logs
> > > > >
> > > > > I did these tests and here is the results:
> > > >
> > > > Did you hand edit the In-Reply-To: in the header? Because in the
> > > > thread you are reply to the wrong email, but the context in your email
> > > > seems to be from the right email.
> > > >
> > > > For example, see how your reply isn't under the email you are replying
> > > > to in this thread overview:
> > > > https://lore.kernel.org/lkml/20230127001141.407071-1-saravanak@google.com/#r
> > > >
> > > > > 1. On top of this series - Not works
> > > > > 2. Without this series    - Works
> > > > > 3. On top of the series with the fwnode_dev_initialized() deleted - Not works
> > > > > 4. Without this series, with the fwnode_dev_initialized() deleted  - Works
> > > > >
> > > > > So your nvmem/core.c patch helps only when it is applied without the series.
> > > > > But despite the fact that this helps to avoid getting stuck at probing
> > > > > my ethernet device, there is still regression.
> > > > >
> > > > > When the ethernet module is loaded it takes a lot of time to drop dependency
> > > > > from the nvmem-cell with mac address.
> > > > >
> > > > > Please look at the kernel logs below.
> > > >
> > > > The kernel logs below really aren't that useful for me in their
> > > > current state. See more below.
> > > >
> > > > ---8<---- <snip> --->8----
> > > >
> > > > > P.S. Your nvmem patch definitely helps to avoid a device probe stuck
> > > > > but look like it is not best way to solve a problem which we discussed
> > > > > in the MTD thread.
> > > > >
> > > > > P.P.S. Also I don't know why your nvmem-cell patch doesn't help when it was
> > > > > applied on top of this series. Maybe I missed something.
> > > >
> > > > Yeah, I'm not too sure if the test was done correctly. You also didn't
> > > > answer my question about the dts from my earlier email.
> > > > https://lore.kernel.org/lkml/CAGETcx8FpmbaRm2CCwqt3BRBpgbogwP5gNB+iA5OEtuxWVTNLA@mail.gmail.com/#t
> > > >
> > > > So, can you please retest config 1 with all pr_debug and dev_dbg in
> > > > drivers/core/base.c changed to the _info variants? And then share the
> > > > kernel log from the beginning of boot? Maybe attach it to the email so
> > > > it doesn't get word wrapped by your email client. And please point me
> > > > to the .dts that corresponds to your board. Without that, I can't
> > > > debug much.
> > > >
> > > > Thanks,
> > > > Saravana
> > >
> > > > Did you hand edit the In-Reply-To: in the header? Because in the
> > > > thread you are reply to the wrong email, but the context in your email
> > > > seems to be from the right email.
> > >
> > > Sorry for that, it seems like I accidently deleted it.
> > >
> > > > So, can you please retest config 1 with all pr_debug and dev_dbg in
> > > > drivers/core/base.c changed to the _info variants? And then share the
> > > > kernel log from the beginning of boot? Maybe attach it to the email so
> > > > it doesn't get word wrapped by your email client. And please point me
> > > > to the .dts that corresponds to your board. Without that, I can't
> > > > debug much.
> > >
> > > Ok, I retested config 1 with all _debug logs changed to the _info. I
> > > added the kernel log and the dts file to the attachment of this email.
> >
> > Ah, so your device is not supported/present upstream? Even though it's
> > not upstream, I'll help fix this because it should fix what I believe
> > are unreported issues in upstream.
> >
> > Ok I know why configs 1 - 4 behaved the way they did and why my test
> > patch didn't help.
> >
> > After staring at mtd/nvmem code for a few hours I think mtd/nvmem
> > interaction is kind of a mess. mtd core creates "partition" platform
> > devices (including for nvmem-cells) that are probed by drivers in
> > drivers/nvmem. However, there's no driver for "nvmem-cells" partition
> > platform device. However, the nvmem core creates nvmem_device when
> > nvmem_register() is called by MTD or these partition platform devices
> > created by MTD. But these nvmem_devices are added to a nvmem_bus but
> > the bus has no means to even register a driver (it should really be a
> > nvmem_class and not nvmem_bus). And the nvmem_device sometimes points
> > to the DT node of the MTD device or sometimes the partition platform
> > devices or maybe no DT node at all.
> >
> > So it's a mess of multiple devices pointing to the same DT node with
> > no clear way to identify which ones will point to a DT node and which
> > ones will probe and which ones won't. In the future, we shouldn't
> > allow adding new compatible strings for partitions for which we don't
> > plan on adding nvmem drivers.
>
> That won't work. Having a compatible string cannot mean there must be a driver.

Right, I know what you mean Rob and I know where you are coming from
(DT isn't just about Linux or even driver core). But what I'm saying
is that this seems to already be the case for MTD partitions after
commit:
bcdf0315a61a mtd: call of_platform_populate() for MTD partitions

So, if we are adding compatible properties only for some of them, then
I'm saying we should make sure people write drivers for them going
forward.

I don't know enough about MTD partitions to know why only some of them
have compatible properties.

-Saravana