[PATCH net] net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-aware
Arınç ÜNAL
arinc.unal at arinc9.com
Mon Feb 6 08:41:06 PST 2023
Finally I got time. It's been a seismically active day where I'm from.
On 6.02.2023 02:50, Vladimir Oltean wrote:
> On Mon, Feb 06, 2023 at 02:02:48AM +0300, Arınç ÜNAL wrote:
>> # ethtool -S eth1 | grep -v ': 0'
>> NIC statistics:
>> tx_bytes: 6272
>> tx_packets: 81
>> rx_bytes: 9089
>> rx_packets: 136
>> p05_TxUnicast: 52
>> p05_TxMulticast: 3
>> p05_TxBroadcast: 81
>> p05_TxPktSz65To127: 136
>> p05_TxBytes: 9633
>> p05_RxFiltering: 11
>> p05_RxUnicast: 11
>> p05_RxMulticast: 26
>> p05_RxBroadcast: 44
>> p05_RxPktSz64: 47
>> p05_RxPktSz65To127: 34
>> p05_RxBytes: 6272
>> # ethtool -S eth1 | grep -v ': 0'
>> NIC statistics:
>> tx_bytes: 6784
>> tx_packets: 89
>> rx_bytes: 9601
>> rx_packets: 144
>> p05_TxUnicast: 60
>> p05_TxMulticast: 3
>> p05_TxBroadcast: 81
>> p05_TxPktSz65To127: 144
>> p05_TxBytes: 10177
>> p05_RxFiltering: 11
>> p05_RxUnicast: 11
>> p05_RxMulticast: 26
>> p05_RxBroadcast: 52
>> p05_RxPktSz64: 55
>> p05_RxPktSz65To127: 34
>> p05_RxBytes: 6784
>> # ethtool -S eth1 | grep -v ': 0'
>> NIC statistics:
>> tx_bytes: 7424
>> tx_packets: 99
>> rx_bytes: 10241
>> rx_packets: 154
>> p05_TxUnicast: 70
>> p05_TxMulticast: 3
>> p05_TxBroadcast: 81
>> p05_TxPktSz65To127: 154
>> p05_TxBytes: 10857
>> p05_RxFiltering: 11
>> p05_RxUnicast: 11
>> p05_RxMulticast: 26
>> p05_RxBroadcast: 62
>> p05_RxPktSz64: 65
>> p05_RxPktSz65To127: 34
>> p05_RxBytes: 7424
>
> I see no signs of packet loss on the DSA master or the CPU port.
> However my analysis of the packets shows:
>
>> # tcpdump -i eth1 -e -n -Q in -XX
>> tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
>> listening on eth1, link-type NULL (BSD loopback), snapshot length 262144 bytes
>> 03:50:38.645568 AF Unknown (2459068999), length 60:
>> 0x0000: 9292 6a47 1ac0 e0d5 5ea4 edcc 0806 0001 ..jG....^.......
> ^ ^ ^
> | | |
> | | ETH_P_ARP
> | MAC SA:
> | e0:d5:5e:a4:ed:cc
> MAC DA:
> 92:92:6a:47:1a:c0
>
>> 0x0010: 0800 0604 0002 e0d5 5ea4 edcc c0a8 0202 ........^.......
>> 0x0020: 9292 6a47 1ac0 c0a8 0201 0000 0000 0000 ..jG............
>> 0x0030: 0000 0000 0000 0000 0000 0000 ............
>
> So you have no tag_mtk header in the EtherType position where it's
> supposed to be. This means you must be making use of the hardware DSA
> untagging feature that Felix Fietkau added.
>
> Let's do some debugging. I'd like to know 2 things, in this order.
> First, whether DSA sees the accelerated header (stripped by hardware, as
> opposed to being present in the packet):
>
> diff --git a/net/dsa/tag.c b/net/dsa/tag.c
> index b2fba1a003ce..e64628cf7fc1 100644
> --- a/net/dsa/tag.c
> +++ b/net/dsa/tag.c
> @@ -75,12 +75,17 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
> if (!skb_has_extensions(skb))
> skb->slow_gro = 0;
>
> + netdev_err(dev, "%s: skb %px metadata dst contains port id %d attached\n",
> + __func__, skb, port);
> +
> skb->dev = dsa_master_find_slave(dev, 0, port);
> if (likely(skb->dev)) {
> dsa_default_offload_fwd_mark(skb);
> nskb = skb;
> }
> } else {
> + netdev_err(dev, "%s: there is no metadata dst attached to skb 0x%px\n",
> + __func__, skb);
> nskb = cpu_dp->rcv(skb, dev);
> }
>
# ping 192.168.2.2
PING 192.168.2.2[ 39.508013] mtk_soc_eth 1b100000.ethernet eth1:
dsa_switch_rcv: there is no metadata dst attached to skb 0xc2dfecc0
(192.168.2.2): 56 data bytes
[ 40.558253] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfed80
^C
--- 192.168.2.2 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
# [ 41.598312] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv:
there is no metadata dst attached to skb 0xc2dfee40
[ 55.432363] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfef00
[ 56.442233] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfef00
[ 57.466253] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfef00
[ 60.538211] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfef00
[ 61.562191] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfec00
[ 62.586190] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: there
is no metadata dst attached to skb 0xc2dfeb40
On a working port:
[ 113.278462] mt7530 mdio-bus:1f wan: Link is Down
[ 113.283214] br0: port 1(wan) entered disabled state
[ 115.438955] mt7530 mdio-bus:1f lan0: Link is Up - 1Gbps/Full - flow
control off
[ 115.446332] br0: port 2(lan0) entered blocking state
[ 115.451346] br0: port 2(lan0) entered forwarding state
[ 118.007199] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: skb
c2dfeb40 metadata dst contains port id 1 attached
[ 118.018209] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: skb
c2dfeb40 metadata dst contains port id 1 attached
[ 119.009252] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: skb
c2dfed80 metadata dst contains port id 1 attached
[ 120.010470] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: skb
c2dfed80 metadata dst contains port id 1 attached
[ 123.038246] mtk_soc_eth 1b100000.ethernet eth1: dsa_switch_rcv: skb
c2dfe900 metadata dst contains port id 1 attached
>
> And second, which is what does the DSA master actually see, and put in
> the skb metadata dst field:
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index f1cb1efc94cf..e7ff569959b4 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -2077,11 +2077,23 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
> if (skb_vlan_tag_present(skb) && netdev_uses_dsa(netdev)) {
> unsigned int port = ntohs(skb->vlan_proto) & GENMASK(2, 0);
>
> + netdev_err(netdev, "%s: skb->vlan_proto 0x%x port %d\n", __func__,
> + ntohs(skb->vlan_proto), port);
> +
> if (port < ARRAY_SIZE(eth->dsa_meta) &&
> - eth->dsa_meta[port])
> + eth->dsa_meta[port]) {
> + netdev_err(netdev, "%s: attaching metadata dst with port %d to skb 0x%px\n",
> + __func__, port, skb);
> skb_dst_set_noref(skb, ð->dsa_meta[port]->dst);
> + } else {
> + netdev_err(netdev, "%s: not attaching any metadata dst to skb 0x%px\n",
> + __func__, skb);
> + }
>
> __vlan_hwaccel_clear_tag(skb);
> + } else if (netdev_uses_dsa(netdev)) {
> + netdev_err(netdev, "%s: received skb 0x%px without VLAN/DSA tag present\n",
> + __func__, skb);
> }
>
> skb_record_rx_queue(skb, 0);
>
> Be warned that there may be a considerable amount of output to the console,
> so it would be best if you used a single switch port with small amounts
> of traffic.
# ping 192.168.2.2
PING 192.168.2.2[ 22.674182] mtk_soc_eth 1b100000.ethernet eth1:
mtk_poll_rx: received skb 0xc2d67840 without VLAN/DSA tag present
(192.168.2.2): 56 data bytes
[ 23.678336] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx: received
skb 0xc2d67840 without VLAN/DSA tag present
[ 24.718355] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx: received
skb 0xc2d67840 without VLAN/DSA tag present
^C
--- 192.168.2.2 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
# [ 28.757693] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
received skb 0xc2d67840 without VLAN/DSA tag present
[ 29.758347] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx: received
skb 0xc2d67840 without VLAN/DSA tag present
[ 30.782404] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx: received
skb 0xc2d67840 without VLAN/DSA tag present
[ 33.854281] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx: received
skb 0xc2d67840 without VLAN/DSA tag present
On a working port:
[ 48.798419] mt7530 mdio-bus:1f wan: Link is Down
[ 48.803166] br0: port 1(wan) entered disabled state
[ 50.958903] mt7530 mdio-bus:1f lan0: Link is Up - 1Gbps/Full - flow
control off
[ 50.966282] br0: port 2(lan0) entered blocking state
[ 50.971300] br0: port 2(lan0) entered forwarding state
[ 54.261846] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
skb->vlan_proto 0x1 port 1
[ 54.269905] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
attaching metadata dst with port 1 to skb 0xc2d67840
[ 54.280412] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
skb->vlan_proto 0x1 port 1
[ 54.288460] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
attaching metadata dst with port 1 to skb 0xc2d67840
[ 55.263241] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
skb->vlan_proto 0x1 port 1
[ 55.271292] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
attaching metadata dst with port 1 to skb 0xc2d67840
[ 59.358317] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
skb->vlan_proto 0x1 port 1
[ 59.366361] mtk_soc_eth 1b100000.ethernet eth1: mtk_poll_rx:
attaching metadata dst with port 1 to skb 0xc2d67a80
Arınç
More information about the linux-arm-kernel
mailing list