[GIT PULL] TI K3 device tree updates for v6.3

[Vignesh Raghavendra]

Hi ARM SoC Maintainers,


The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:

  Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.3

for you to fetch changes up to 47d72bbb6c0f7dc0901d7601d1aa6b1419282049:

  arm64: dts: ti: Makefile: Rearrange entries alphabetically (2023-02-01 23:10:29 +0530)

----------------------------------------------------------------
TI K3 device tree updates for v6.3

New features:
J784S4 SoC and EVM support
AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2
AM62A7 SK additional peripherals
AM62 SK USB support

Non critical fixes
AM62:
McSPI Clock ID fixes
MMC TAP value updates
J7200:
pinmux range update
All:
Cache DT node fixes

Cleanups:
Reorder dts Makefile entries alphabetically

----------------------------------------------------------------
Apurva Nandan (4):
      dt-bindings: arm: ti: Add bindings for J784s4 SoC
      dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4
      arm64: dts: ti: Add initial support for J784S4 SoC
      arm64: dts: ti: Add support for J784S4 EVM board

Aswath Govindraju (2):
      arm64: dts: ti: k3-am62-main: Add support for USB
      arm64: dts: ti: k3-am625-sk: Add support for USB

Dasnavis Sabiya (2):
      dt-bindings: arm: ti: Add binding for AM69 Starter Kit
      arch: arm64: dts: Add support for AM69 Starter Kit

Dhruva Gole (1):
      arm64: dts: ti: k3-am62-main: Fix clocks for McSPI

Jan Kiszka (2):
      arm64: dts: ti: iot2050: Add layout of OSPI flash
      dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant

Nitin Yadav (1):
      arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select

Pierre Gondois (1):
      arm64: dts: Update cache properties for ti

Sinthu Raja (3):
      dt-bindings: arm: ti: Add binding for AM68 SK
      arm64: dts: ti: Add initial support for AM68 SK System on Module
      arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

Vaishnav Achath (1):
      arm64: dts: ti: k3-j7200: Fix wakeup pinmux range

Vignesh Raghavendra (5):
      arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals
      arm64: dts: ti: k3-am62a-main: Add more peripheral nodes
      arm64: dts: ti: k3-am62a7-sk: Enable ethernet port
      arm64: dts: ti: k3-am62a7-sk: Enable USB1 node
      arm64: dts: ti: Makefile: Rearrange entries alphabetically

Wadim Egorov (2):
      dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware
      arm64: dts: ti: Add support for phyBOARD-Electra-AM642

chao zeng (1):
      arm64: dts: ti: iot2050: Add support for M.2 variant

 Documentation/devicetree/bindings/arm/ti/k3.yaml         |   15 +
 arch/arm64/boot/dts/ti/Makefile                          |   35 +-
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi                 |   98 +-
 arch/arm64/boot/dts/ti/k3-am625-sk.dts                   |   27 +
 arch/arm64/boot/dts/ti/k3-am625.dtsi                     |    1 +
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi                |  365 ++++
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi                 |   51 +
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts                  |   70 +
 arch/arm64/boot/dts/ti/k3-am62a7.dtsi                    |    1 +
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi          |  231 +++
 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts |  277 +++
 arch/arm64/boot/dts/ti/k3-am642.dtsi                     |    1 +
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi       |   46 +
 arch/arm64/boot/dts/ti/k3-am654.dtsi                     |    2 +
 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts |  121 ++
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts         |  335 +++
 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi               |   29 +
 arch/arm64/boot/dts/ti/k3-am69-sk.dts                    |  180 ++
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts    |    2 +-
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi          |   29 +-
 arch/arm64/boot/dts/ti/k3-j7200.dtsi                     |    1 +
 arch/arm64/boot/dts/ti/k3-j721e.dtsi                     |    1 +
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi                    |    1 +
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts                 |  196 ++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi               | 1007 ++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi         |  311 +++
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi                    |  287 +++
 include/dt-bindings/pinctrl/k3.h                         |    3 +
 28 files changed, 3688 insertions(+), 35 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am69-sk.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4.dtsi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0xF903332F551A78E9.asc
Type: application/pgp-keys
Size: 8806 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230203/7d27103d/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 495 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230203/7d27103d/attachment-0001.sig>