[PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 12:45, Marek Szyprowski wrote:
> Hi Krzysztof,
> 
> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    exynos4412.dtsi:407.20-413.5:
>>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos4412-i9300.dtb: soc: bus-acp:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>> Applied.
> 
> I don't have a good news. It looks that this change is responsible for 
> breaking boards that were rock-stable so far, like Odroid U3. I didn't 
> manage to analyze what exactly causes the issue, but it looks that the 
> exynos-bus devfreq driver somehow depends on the order of the nodes:
> 
> (before)
> 
> # dmesg | grep exynos-bus
> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc 
> (100000 KHz ~ 400000 KHz)
> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp 
> (100000 KHz ~ 267000 KHz)
> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c 
> (100000 KHz ~ 400000 KHz)
> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus 
> (100000 KHz ~ 200000 KHz)
> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus 
> (100000 KHz ~ 200000 KHz)
> [    6.494612] exynos-bus: new bus device registered: soc:bus-display 
> (160000 KHz ~ 200000 KHz)
> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys 
> (100000 KHz ~ 134000 KHz)
> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri ( 
> 50000 KHz ~ 100000 KHz)
> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc 
> (100000 KHz ~ 200000 KHz)
> 
> (after)
> 
> # dmesg | grep exynos-bus
> 
> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000 
> KHz ~ 400000 KHz)
> [    6.122726] exynos-bus: new bus device registered: bus-leftbus 
> (100000 KHz ~ 200000 KHz)
> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000 
> KHz ~ 200000 KHz)
> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000 
> KHz ~ 100000 KHz)
> [    6.204770] exynos-bus: new bus device registered: bus-rightbus 
> (100000 KHz ~ 200000 KHz)
> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000 
> KHz ~ 267000 KHz)
> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000 
> KHz ~ 400000 KHz)
> [    6.225748] exynos-bus: new bus device registered: bus-display 
> (160000 KHz ~ 200000 KHz)
> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000 
> KHz ~ 134000 KHz)
> 
> This is definitely a driver bug, but so far it worked fine, so this is a 
> regression that need to be addressed somehow...


Thanks for checking, but what is exactly the bug? The devices registered
- just with different name.

Best regards,
Krzysztof