[PATCH V2 6/6] remoteproc: imx_rproc: set address of .interrupts section as bootaddr

[Mathieu Poirier]

On Fri, Jan 27, 2023 at 05:22:46PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> i.MX93 M33 has ROM, it needs the ".interrupts" section address to start
> M33 firmware. In current design, the Arm Trusted Firmware(ATF) use TCML
> start address when the 2nd arg is 0 when SMC call. So When the M33 firmware
> is built with TCML address, it works well.
> 
> However when M33 firmware is built to run in DDR, we need pass the
> ".interrupts" address as 2nd arg to ATF to start M33 firmwrae.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index f5ee0c9bb09d..59cca5ac3045 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -374,7 +374,8 @@ static int imx_rproc_start(struct rproc *rproc)
>  					 dcfg->src_start);
>  		break;
>  	case IMX_RPROC_SMC:
> -		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, 0, 0, 0, 0, 0, 0, &res);
> +		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, rproc->bootaddr,
> +			      0, 0, 0, 0, 0, &res);
>  		ret = res.a0;
>  		break;
>  	case IMX_RPROC_SCU_API:
> @@ -664,6 +665,13 @@ static u64 imx_rproc_get_boot_addr(struct rproc *rproc, const struct firmware *f
>  		 */
>  		writel(*(u32 *)(elf_data + offset), va);
>  		writel(*(u32 *)(elf_data + offset + 4), va + 4);
> +	} else if (priv->dcfg->devtype == IMX_RPROC_IMX93) {
> +		/* i.MX93 Cortex-M33 has ROM, it only needs the section address */
> +		shdr = rproc_elf_find_shdr(rproc, fw, ".interrupts");
> +		if (!shdr)
> +			return bootaddr;

This contradicts what you wrote in the cover letter of the patchset about an
".interrupts" section always being present.

There is enough in this patchset to make me look for a second opinion.  As such
I am CC'ing Iuliana and Daniel.  Please respin this, adding both of them to the
recipient list.  I will do another revision only when they have provided an RB
tag.  

Thanks,
Mathieu

> +
> +		return elf_shdr_get_sh_addr(class, shdr);
>  	}
>  
>  	return bootaddr;
> -- 
> 2.37.1
>