[PATCH v2 2/5] arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi

[arinc9.unal at gmail.com]

From: Arınç ÜNAL <arinc.unal at arinc9.com>

The MT7530 switch is included as a part of the multi-chip module on the
MT7623AI SoC. Add it to mt7623a.dtsi and adjust DTs that call mt7623a.dtsi.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 87 +++++++-------------------
 arch/arm/boot/dts/mt7623a-rfb-nand.dts | 87 +++++++-------------------
 arch/arm/boot/dts/mt7623a.dtsi         | 74 ++++++++++++++++++++++
 3 files changed, 118 insertions(+), 130 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
index a64d68b6e165..5654284bab01 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -112,74 +112,31 @@ &crypto {
 	status = "okay";
 };
 
-&gmac0 {
-	status = "okay";
-	phy-mode = "trgmii";
+&switch0 {
+	ports {
+		port at 0 {
+			status = "okay";
+			label = "lan0";
+		};
 
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-		pause;
-	};
-};
+		port at 1 {
+			status = "okay";
+			label = "lan1";
+		};
 
-&eth {
-	status = "okay";
+		port at 2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port at 3 {
+			status = "okay";
+			label = "lan3";
+		};
 
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch at 0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port at 1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port at 2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port at 3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port at 4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port at 6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
+		port at 4 {
+			status = "okay";
+			label = "wan";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
index fac3ca0322c8..afd177b3b516 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -116,74 +116,31 @@ &crypto {
 	status = "okay";
 };
 
-&gmac0 {
-	status = "okay";
-	phy-mode = "trgmii";
+&switch0 {
+	ports {
+		port at 0 {
+			status = "okay";
+			label = "lan0";
+		};
 
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-		pause;
-	};
-};
+		port at 1 {
+			status = "okay";
+			label = "lan1";
+		};
 
-&eth {
-	status = "okay";
+		port at 2 {
+			status = "okay";
+			label = "lan2";
+		};
 
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch at 0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port at 1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port at 2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port at 3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port at 4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port at 6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
+		port at 3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port at 4 {
+			status = "okay";
+			label = "wan";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index d304b62d24b5..fbb5731a3a53 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -17,8 +17,82 @@ &crypto {
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
 };
 
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
 &eth {
+	status = "okay";
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: switch at 0 {
+			compatible = "mediatek,mt7530";
+			reg = <0>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					status = "disabled";
+					reg = <0>;
+					label = "swp0";
+				};
+
+				port at 1 {
+					status = "disabled";
+					reg = <1>;
+					label = "swp1";
+				};
+
+				port at 2 {
+					status = "disabled";
+					reg = <2>;
+					label = "swp2";
+				};
+
+				port at 3 {
+					status = "disabled";
+					reg = <3>;
+					label = "swp3";
+				};
+
+				port at 4 {
+					status = "disabled";
+					reg = <4>;
+					label = "swp4";
+				};
+
+				port at 6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
 };
 
 &nandc {
-- 
2.37.2