[PATCH v4 00/11] dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards

[Josua Mayer]

Dear Maintainers,

The initially merged device-tree for Clearfog GTR devices contained
various subtle mistakes and omissions:

- missing board-specific compatible strings
- missing pinctrl entries
- missing second sfp connector
- invalid sfp loss-of-signal gpio
- mismatch of labels between dsa ports and enclosure

Most notably this had caused functional issues with the sfp connectors.

This patch-set first deletes the invalid armada-38x dt-bindings.
New bindings are added specifically for the Clearfog GTR boards,
and for the already in-tree clearfog base, clearfog pro and helios-4
boards' compatible strings.

Secondly pinctrl nodes are added for all referenced gpios for independence
from bootloader defaults. U-Boot is shared between armada-388 clearfog,
and armada-385 clearfog gtr.

Further remove an invalid io from the first sfp connector description,
and add descriptions for the secondary sfp connector which is driven
by dsa switch port number 9.

Finally labels of dsa switch ports were updated to match the enclosure.
That patch is not suitable for stable.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
Changes in v4:
- dropped invalid soc-only armada-38x (txt) bindings
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>)
- add bindings for armada 388 helios-4
- updated yaml whitespace indentation count
  (reported by Rob Hering's bot)
- Link to v3: https://lore.kernel.org/r/20231226-support-clearfog-gtr-l8-sfp-v3-0-fd1ac2d6bf2e@solid-run.com

Changes in v3:
- armada-38x.yaml: removed '|', no need to prerserve formatting
  (reported by Conor Dooley conor+dt at kernel.org)
- update commit descriptions to clarify confusing board names and
  compatible strings
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>)
- send to all relevant lists
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>)
- remove duplicate binding for clearfog / clearfog
- Link to v2 (patches 0-2):
  https://lore.kernel.org/r/20231224143750.5604-1-josua@solid-run.com
- Link to v2 (patches 3-8):
  https://lore.kernel.org/r/20231224143850.5671-3-josua@solid-run.com

Changes in v2:
- removed changes changes to gpio numbers because they were wrong
- added bindings documentation
- Link to v1: https://lore.kernel.org/r/20231223212930.14624-1-josua@solid-run.com

---
Josua Mayer (11):
      dt-bindings: marvell: a38x: remove invalid txt bindings for armada 38x SoCs
      dt-bindings: marvell: a38x: convert the soc compatibles description to yaml
      dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards
      dt-bindings: marvell: a38x: add kobol helios-4 board
      dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards
      arm: dts: marvell: clearfog: add pro variant compatible in legacy dts
      arm: dts: marvell: clearfog-gtr: add board-specific compatible strings
      arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically
      arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios
      arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
      arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure

 .../devicetree/bindings/arm/marvell/armada-38x.txt | 27 -------
 .../bindings/arm/marvell/armada-38x.yaml           | 49 +++++++++++++
 .../dts/marvell/armada-385-clearfog-gtr-l8.dts     | 38 +++++++---
 .../dts/marvell/armada-385-clearfog-gtr-s4.dts     |  2 +
 .../boot/dts/marvell/armada-385-clearfog-gtr.dtsi  | 84 ++++++++++++++++------
 arch/arm/boot/dts/marvell/armada-388-clearfog.dts  |  5 +-
 6 files changed, 146 insertions(+), 59 deletions(-)
---
base-commit: 861deac3b092f37b2c5e6871732f3e11486f7082
change-id: 20231226-support-clearfog-gtr-l8-sfp-d87ae715a787

Sincerely,
-- 
Josua Mayer <josua at solid-run.com>