[PATCH net-next v1 1/4] dt-bindings: net: snps,dwmac: per channel irq

[Serge Semin]

On Fri, Dec 22, 2023 at 01:44:48PM +0800, Leong Ching Swee wrote:
> From: Swee Leong Ching <leong.ching.swee at intel.com>
> 
> Add dt-bindings for per channel irq.
> 
> Signed-off-by: Rohan G Thomas <rohan.g.thomas at intel.com>
> Signed-off-by: Swee Leong Ching <leong.ching.swee at intel.com>
> ---
>  .../devicetree/bindings/net/snps,dwmac.yaml   | 24 +++++++++++++------
>  1 file changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 5c2769dc689a..e72dded824f4 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -103,17 +103,27 @@ properties:
>  
>    interrupts:
>      minItems: 1
> -    items:
> -      - description: Combined signal for various interrupt events
> -      - description: The interrupt to manage the remote wake-up packet detection
> -      - description: The interrupt that occurs when Rx exits the LPI state
> +    maxItems: 19
>  
>    interrupt-names:
>      minItems: 1
> +    maxItems: 19
>      items:
> -      - const: macirq
> -      - enum: [eth_wake_irq, eth_lpi]
> -      - const: eth_lpi
> +      oneOf:
> +        - description: Combined signal for various interrupt events
> +          const: macirq
> +        - description: The interrupt to manage the remote wake-up packet detection
> +          const: eth_wake_irq
> +        - description: The interrupt that occurs when Rx exits the LPI state
> +          const: eth_lpi
> +        - description: DMA Tx per-channel interrupt
> +          pattern: '^dma_tx[0-7]?$'
> +        - description: DMA Rx per-channel interrupt
> +          pattern: '^dma_rx[0-7]?$'
> +

> +    allOf:
> +      - contains:
> +          const: macirq

As Rob correctly noted it's also better to make sure that 'macirq' is
placed first in the array. So instead of the constraint above I guess
the next one would make sure both the array has 'macirq' name and it's
the first item:

allOf:
  - maxItems: 34
    items:
      - const: macirq

-Serge(y)

>  
>    clocks:
>      minItems: 1
> -- 
> 2.34.1
> 
>