[RFC PATCH net-next 0/8] Add support for ICSSG-based Ethernet on SR1.0 devices

[Diogo Ivo]

Hello,

This series extends the current ICSSG-based Ethernet driver to support
Silicon Revision 1.0 devices.

Notable differences between the Silicon Revisions are that there is
no TX core in SR1.0 with this being handled by the firmware, requiring
extra DMA channels to communicate commands to the firmware (with the
firmware being different as well) and in the packet classifier.

The motivation behind it is that a significant number of Siemens
devices containing SR1.0 silicon have been deployed in the field
and need to be supported and updated to newer kernel versions
without losing functionality.

This series is based on TI's 5.10 SDK [1].

[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y

Diogo Ivo (7):
  net: ti: icssg-config: add SR1.0-specific configuration bits
  net: ti: icssg-prueth: add SR1.0-specific configuration bits
  net: ti: icssg-classifier: Add support for SR1.0
  net: ti: icssg-config: Add SR1.0 configuration functions
  net: ti: icssg-ethtool: Adjust channel count for SR1.0
  net: ti: iccsg-prueth: Add necessary functions for SR1.0 support
  net: ti: icssg-prueth: Wire up support for SR1.0

Jan Kiszka (1):
  dt-bindings: net: Add support for AM65x SR1.0 in ICSSG

 .../bindings/net/ti,icssg-prueth.yaml         |  62 +-
 .../net/ethernet/ti/icssg/icssg_classifier.c  | 113 +++-
 drivers/net/ethernet/ti/icssg/icssg_config.c  |  90 ++-
 drivers/net/ethernet/ti/icssg/icssg_config.h  |  61 +-
 drivers/net/ethernet/ti/icssg/icssg_ethtool.c |  10 +-
 drivers/net/ethernet/ti/icssg/icssg_prueth.c  | 556 ++++++++++++++++--
 drivers/net/ethernet/ti/icssg/icssg_prueth.h  |  21 +-
 7 files changed, 812 insertions(+), 101 deletions(-)

-- 
2.43.0