[PATCH 4/4] dts: iot2050: Support IOT2050-SM variant

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue Dec 19 01:50:19 PST 2023


On 19/12/2023 10:03, Jan Kiszka wrote:
> On 19.12.23 09:48, Krzysztof Kozlowski wrote:
>> On 19/12/2023 09:22, Jan Kiszka wrote:
>>>>
>>>>> +			gpios = <&wkup_gpio0 53 GPIO_ACTIVE_HIGH>;
>>>>
>>>> Ditto
>>>>
>>>
>>> This is adjusting the existing LED nodes in k3-am65-iot2050-common.dtsi,
>>> not introducing new ones. We can add the color properties in a separate
>>
>>
>> Then why aren't you overriding by phandle/label?
>>
> 
> We could do that as well if we added labels first (they don't exist so 
> far). Not seeing any difference, though.

Confusion? Your code suggests new node, thus you got review like you got.

> 
>>> patch, but the node names are now part of the kernel ABI. Changing them
>>> would break existing userland.
>>
>> You mean label. Why node names became the ABI? Which interface exposes them?
> 
> root at iot2050-debian:~# ls -l /sys/class/leds/
> total 0
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 mmc0:: -> ../../devices/platform/bus at 100000/4fa0000.mmc/leds/mmc0::
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 mmc1:: -> ../../devices/platform/bus at 100000/4f80000.mmc/leds/mmc1::
> lrwxrwxrwx 1 root root 0 Dec 14 21:12 status-led-green -> ../../devices/platform/leds/leds/status-led-green
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 status-led-red -> ../../devices/platform/leds/leds/status-led-red
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 user-led1-green -> ../../devices/platform/leds/leds/user-led1-green
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 user-led1-red -> ../../devices/platform/leds/leds/user-led1-red
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 user-led2-green -> ../../devices/platform/leds/leds/user-led2-green
> lrwxrwxrwx 1 root root 0 Dec 19 08:55 user-led2-red -> ../../devices/platform/leds/leds/user-led2-red

I replied too fast previous and did not include answer here:

You have label for that... Somehow all these nodes are half-baked,
without all the expected properties and now you call node name as ABI.
The node name is not the ABI.

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list