[PATCH 0/4] arm64: dts: iot2050: Add support for new SM variant

[Jan Kiszka]

This bring support for yet another IOT2050 device variant, see last
patch for details. The rest is binding and refactoring to make that
happen.

Jan

Baocheng Su (2):
  arm64: dts: ti: iot2050: Disable R5 lockstep for all PG2 boards
  dts: iot2050: Support IOT2050-SM variant

Jan Kiszka (1):
  arm64: dts: ti: iot2050: Factor out arduino connector bits

Su Bao Cheng (1):
  dt-bindings: arm: ti: Add binding for Siemens IOT2050 SM variant

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../ti/k3-am65-iot2050-arduino-connector.dtsi | 768 ++++++++++++++++++
 .../dts/ti/k3-am65-iot2050-common-pg2.dtsi    |   7 +-
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 753 -----------------
 .../ti/k3-am6528-iot2050-basic-common.dtsi    |   6 +-
 .../boot/dts/ti/k3-am6528-iot2050-basic.dts   |   5 +
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  |   6 +-
 .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts |   8 +-
 .../dts/ti/k3-am6548-iot2050-advanced-sm.dts  | 210 +++++
 .../dts/ti/k3-am6548-iot2050-advanced.dts     |   1 +
 11 files changed, 996 insertions(+), 770 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts

-- 
2.35.3