[PATCH 1/4] dt-bindings: nvmem: layouts: add U-Boot environment variables layout

[Rob Herring]

On Mon, 18 Dec 2023 14:37:19 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
> 
> U-Boot env data is a way of storing firmware variables. It's a format
> that can be used of top of various storage devices. Its binding should
> be an NVMEM layout instead of a standalone device.
> 
> This patch adds layout binding which allows using it on top of MTD NVMEM
> device as well as any other. At the same time it deprecates the old
> combined binding.
> 
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
>  .../bindings/nvmem/layouts/u-boot,env.yaml    | 55 +++++++++++++++++++
>  .../devicetree/bindings/nvmem/u-boot,env.yaml |  6 ++
>  2 files changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/nvmem/u-boot,env.example.dtb: partition at 40000: 'ethaddr', 'reg' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/nvmem/layouts/u-boot,env.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/nvmem/u-boot,env.example.dtb: partition-u-boot-env: 'ethaddr' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/nvmem/layouts/u-boot,env.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231218133722.16150-1-zajec5@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.