[PATCH 2/3] media: sun8i-di: Fix power on/off sequences

[Jernej Skrabec]

According to user manual, reset line should be deasserted before clocks
are enabled. Also fix power down sequence to be reverse of that.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec at gmail.com>
---
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  | 25 ++++++++++---------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index 34e099939284..f253a40cc04f 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -929,11 +929,18 @@ static int deinterlace_runtime_resume(struct device *device)
 		return ret;
 	}
 
+	ret = reset_control_deassert(dev->rstc);
+	if (ret) {
+		dev_err(dev->dev, "Failed to apply reset\n");
+
+		goto err_exclusive_rate;
+	}
+
 	ret = clk_prepare_enable(dev->bus_clk);
 	if (ret) {
 		dev_err(dev->dev, "Failed to enable bus clock\n");
 
-		goto err_exclusive_rate;
+		goto err_rst;
 	}
 
 	ret = clk_prepare_enable(dev->mod_clk);
@@ -950,23 +957,16 @@ static int deinterlace_runtime_resume(struct device *device)
 		goto err_mod_clk;
 	}
 
-	ret = reset_control_deassert(dev->rstc);
-	if (ret) {
-		dev_err(dev->dev, "Failed to apply reset\n");
-
-		goto err_ram_clk;
-	}
-
 	deinterlace_init(dev);
 
 	return 0;
 
-err_ram_clk:
-	clk_disable_unprepare(dev->ram_clk);
 err_mod_clk:
 	clk_disable_unprepare(dev->mod_clk);
 err_bus_clk:
 	clk_disable_unprepare(dev->bus_clk);
+err_rst:
+	reset_control_assert(dev->rstc);
 err_exclusive_rate:
 	clk_rate_exclusive_put(dev->mod_clk);
 
@@ -977,11 +977,12 @@ static int deinterlace_runtime_suspend(struct device *device)
 {
 	struct deinterlace_dev *dev = dev_get_drvdata(device);
 
-	reset_control_assert(dev->rstc);
-
 	clk_disable_unprepare(dev->ram_clk);
 	clk_disable_unprepare(dev->mod_clk);
 	clk_disable_unprepare(dev->bus_clk);
+
+	reset_control_assert(dev->rstc);
+
 	clk_rate_exclusive_put(dev->mod_clk);
 
 	return 0;
-- 
2.43.0