[PATCH] arm64: mediatek: remove broken pmic interrupt property

[Macpaul Lin]

On 12/15/23 01:54, Macpaul Lin wrote:
> On 12/13/23 19:09, AngeloGioacchino Del Regno wrote:
>
>> Il 12/12/23 22:47, Arnd Bergmann ha scritto:
>>> From: Arnd Bergmann <arnd at arndb.de>
>>>
>>> The pmic is connected to the GIC, which uses four-cell interrupt 
>>> properties,
>>> but its interrupt is specified as two-cell that would only make 
>>> sense for
>>> the GPIO irqchip:
>>>
>>> arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning 
>>> (interrupts_property): /soc/i2c at 11d01000/pmic at 34:#interrupt-cells: 
>>> size is (8), expected multiple of 16
>>>
>>> Remove the interrupt for now to shut up the warning. When someone 
>>> figures out
>>> what the correct interrupt and parent are, we can add it back.
>>>
>>
>> Please, can anyone from MediaTek comment on that?
>
> Sorry for late response, I've just stuck in other tasks and didn't 
> notice this
>
> patch is for genio-1200-evk. I've tested 6.7-rc1 but I thought it 
> might be an issue
>
> in origin mt8195.dtsi and not be related to board dts.
>
>> I see a mt6360_pins on PIO:
>>             pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
>>                  <PINMUX_GPIO128__FUNC_GPIO128>;
>>
>> ...and that's GPIO128, which may effectively be the IRQ pin for MT6360.
>>
>> Still, I'm not sure whether the interrupt is on GIC or PIO, please 
>> clarify,
>> otherwise we will have to get this commit upstream.
>>
> I think it could be solved by adding
>
> 'interrupt-parent = <&pio>;' to mt6360 node.
>
> But currently I have no much time to verify it.
>
> I'll try to find some time to find out the solution tomorrow.
>
>> Thanks,
>> Angelo
>>
>>> Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for 
>>> Genio 1200 EVK board")
>>> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
>>> ---
>>>   arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 2 --
>>>   1 file changed, 2 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts 
>>> b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> index 70b465f7c6a7..a409ef998746 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> @@ -238,8 +238,6 @@ &i2c6 {
>>>       mt6360: pmic at 34 {
>>>           compatible = "mediatek,mt6360";
>>>           reg = <0x34>;
>>> -        interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
>>> -        interrupt-names = "IRQB";
>>>           interrupt-controller;
>>>           #interrupt-cells = <1>;
>>>           pinctrl-0 = <&mt6360_pins>;
>>
>
> Thanks for pointing out the issue! Let's see if it could be solved by 
> adding 'interrupt-parents'.
>
> Macpaul Lin

I've send a patch to add 'interrupt-parent' for mt6360 and tested with 
my local kernel-6.7-rc1.

Link: 
https://lore.kernel.org/linux-devicetree/20231215073252.21586-1-macpaul.lin@mediatek.com/

Thanks for Angelo , Arnd, and Chen-yu's reminding.

Best regards,

Macpaul Lin