[PATCH 3/5] arm64: dts: imx8qxp: Add audio SAI nodes
Alexander Stein
alexander.stein at ew.tq-group.com
Thu Dec 14 07:02:41 PST 2023
This adds the sai nodes attached to aips1 bus. These can be shared with
imx8qm as well. Input clock from ACM is always feed to mclk1 only. Others
are unused and are connected to a dummy clock.
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
This SAI list is not complete, but re-usable on imx8qm without any further
change. Adding SAI4/5 needs to be done in a SoC-specific file
imx8qxp-ss-audio.dtsi. They are hard-wired to the internal audio mixer as well.
.../boot/dts/freescale/imx8-ss-audio.dtsi | 113 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 ++
2 files changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 61ef0272b06e6..29a7d10f7db3d 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -4,6 +4,7 @@
* Dong Aisheng <aisheng.dong at nxp.com>
*/
+#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/firmware/imx/rsrc.h>
@@ -118,6 +119,70 @@ audio_subsys: bus at 59000000 {
#size-cells = <1>;
ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+ sai0: sai at 59040000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59040000 0x10000>;
+ interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai0_lpcg 1>,
+ <&clk_dummy>,
+ <&sai0_lpcg 0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma0 12 0 1>, <&edma0 13 0 0>;
+ power-domains = <&pd IMX_SC_R_SAI_0>;
+ status = "disabled";
+ };
+
+ sai1: sai at 59050000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59050000 0x10000>;
+ interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai1_lpcg 1>,
+ <&clk_dummy>,
+ <&sai1_lpcg 0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma0 14 0 1>, <&edma0 15 0 0>;
+ power-domains = <&pd IMX_SC_R_SAI_1>;
+ status = "disabled";
+ };
+
+ sai2: sai at 59060000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59060000 0x10000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai2_lpcg 1>,
+ <&clk_dummy>,
+ <&sai2_lpcg 0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx";
+ dmas = <&edma0 16 0 1>;
+ power-domains = <&pd IMX_SC_R_SAI_2>;
+ status = "disabled";
+ };
+
+ sai3: sai at 59070000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59070000 0x10000>;
+ interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai3_lpcg 1>,
+ <&clk_dummy>,
+ <&sai3_lpcg 0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx";
+ dmas = <&edma0 17 0 1>;
+ power-domains = <&pd IMX_SC_R_SAI_3>;
+ status = "disabled";
+ };
+
edma0: dma-controller at 591f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x591f0000 0x190000>;
@@ -174,6 +239,54 @@ edma0: dma-controller at 591f0000 {
<&pd IMX_SC_R_DMA_0_CH23>;
};
+ sai0_lpcg: clock-controller at 59440000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59440000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai0_lpcg_mclk",
+ "sai0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_0>;
+ };
+
+ sai1_lpcg: clock-controller at 59450000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59450000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai1_lpcg_mclk",
+ "sai1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_1>;
+ };
+
+ sai2_lpcg: clock-controller at 59460000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59460000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai2_lpcg_mclk",
+ "sai2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_2>;
+ };
+
+ sai3_lpcg: clock-controller at 59470000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59470000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai3_lpcg_mclk",
+ "sai3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_3>;
+ };
+
dsp_lpcg: clock-controller at 59580000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x59580000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 958267b333403..fdbb4242b157c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -260,6 +260,13 @@ timer {
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
};
+ clk_dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "clk_dummy";
+ };
+
xtal32k: clock-xtal32k {
compatible = "fixed-clock";
#clock-cells = <0>;
--
2.34.1
More information about the linux-arm-kernel
mailing list