[PATCH 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on
Xu Yang
xu.yang_2 at nxp.com
Thu Dec 14 03:26:20 PST 2023
Some platform using ChipIdea IP may keep 32KHz wakeup clock always
on without usb driver intervention. And some may need driver to handle
this clock. This patch will get wakeup clock and keep it always on to
make controller work correctlly.
Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index e28bb2f2612d..4330be8240ff 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -96,6 +96,7 @@ struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
+ struct clk *clk_wakeup;
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool override_phy_control;
@@ -199,7 +200,7 @@ static int imx_get_clks(struct device *dev)
data->clk_ipg = devm_clk_get(dev, "ipg");
if (IS_ERR(data->clk_ipg)) {
- /* If the platform only needs one clocks */
+ /* If the platform only needs one primary clock */
data->clk = devm_clk_get(dev, NULL);
if (IS_ERR(data->clk)) {
ret = PTR_ERR(data->clk);
@@ -208,6 +209,18 @@ static int imx_get_clks(struct device *dev)
PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
return ret;
}
+ /* Get wakeup clock. Not all of the platforms need to
+ * handle this clock. So make it optional.
+ */
+ data->clk_wakeup = devm_clk_get_optional(dev,
+ "usb_wakeup_clk");
+ if (IS_ERR(data->clk_wakeup)) {
+ ret = PTR_ERR(data->clk_wakeup);
+ dev_err(dev,
+ "Failed to get wakeup clk, err=%ld\n",
+ PTR_ERR(data->clk_wakeup));
+ return ret;
+ }
return ret;
}
@@ -423,6 +436,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (ret)
goto disable_hsic_regulator;
+ ret = clk_prepare_enable(data->clk_wakeup);
+ if (ret)
+ goto err_wakeup_clk;
+
data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
ret = PTR_ERR(data->phy);
@@ -504,6 +521,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
+ clk_disable_unprepare(data->clk_wakeup);
+err_wakeup_clk:
imx_disable_unprepare_clks(dev);
disable_hsic_regulator:
if (data->hsic_pad_regulator)
@@ -530,6 +549,7 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev)
usb_phy_shutdown(data->phy);
if (data->ci_pdev) {
imx_disable_unprepare_clks(&pdev->dev);
+ clk_disable_unprepare(data->clk_wakeup);
if (data->plat_data->flags & CI_HDRC_PMQOS)
cpu_latency_qos_remove_request(&data->pm_qos_req);
if (data->hsic_pad_regulator)
--
2.34.1
More information about the linux-arm-kernel
mailing list