[PATCH 0/3] arm64: dts: ti: Add Itap Delay Value For High Speed DDR

[Bhavya Kapoor]

On 06/12/23 12:01 am, Kumar, Udit wrote:
> Hi Bhavya
>
> On 12/1/2023 1:50 PM, Bhavya Kapoor wrote:
>> This Series adds Itap Delay Value for DDR52 speed mode for eMMC in
>> J7200 and for DDR50 speed mode for MMCSD in J721s2 and J784s4 SoC.
>>
>> Rebased to next-20231201
>>
>> Bhavya Kapoor (3):
>>    arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed
>>      mode
>>    arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed
>>      mode
>>    arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed
>>      mode
>
> Could you confirm, after adding itap values, above modes are working 
> fine apart from
>
> mode detection.
>
> Thanks
>
> Udit

Hi Udit, Below are the links to the test logs

j7200 ddr52 - 
https://gist.github.com/a0498981/f9b7b7d3592eaca591dec3e72de45585

j721s2 ddr50 - 
https://gist.github.com/a0498981/9861e1df3fe0fc7c050db4f7a8cc34b8

j784s4 ddr50 - 
https://gist.github.com/a0498981/7c598dd708424252e2629fe0c7458a6d

Thanks

~B-Kapoor

>
>
>> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi  | 1 +
>>   arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 1 +
>>   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 1 +
>>   3 files changed, 3 insertions(+)
>>