[PATCH] arm64: mediatek: remove broken pmic interrupt property

[Arnd Bergmann]

From: Arnd Bergmann <arnd at arndb.de>

The pmic is connected to the GIC, which uses four-cell interrupt properties,
but its interrupt is specified as two-cell that would only make sense for
the GPIO irqchip:

arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning (interrupts_property): /soc/i2c at 11d01000/pmic at 34:#interrupt-cells: size is (8), expected multiple of 16

Remove the interrupt for now to shut up the warning. When someone figures out
what the correct interrupt and parent are, we can add it back.

Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
 arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 70b465f7c6a7..a409ef998746 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -238,8 +238,6 @@ &i2c6 {
 	mt6360: pmic at 34 {
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
-		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "IRQB";
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		pinctrl-0 = <&mt6360_pins>;
-- 
2.39.2