[PATCH v1 7/8] tpm: tis-i2c: Add more compatible strings

[Conor Dooley]

On Tue, Dec 12, 2023 at 10:00:39AM -0800, Guenter Roeck wrote:
> On Tue, Dec 12, 2023 at 05:15:51PM +0000, Conor Dooley wrote:
> > On Tue, Dec 12, 2023 at 10:40:03AM -0600, Ninad Palsule wrote:
> > > From: Joel Stanley <joel at jms.id.au>
> > > 
> > > The NPCT75x TPM is TIS compatible. It has an I2C and SPI interface.
> > > 
> > > https://www.nuvoton.com/products/cloud-computing/security/trusted-platform-module-tpm/
> > > 
> > > Add a compatible string for it, and the generic compatible.
> > > 
> > > OpenBMC-Staging-Count: 3
> > 
> > Delete this from every patch that it appears from.
> > 
> > > Signed-off-by: Joel Stanley <joel at jms.id.au>
> > > Acked-by: Jarkko Sakkinen <jarkko at kernel.org>
> > > Link: https://lore.kernel.org/r/20220928043957.2636877-4-joel@jms.id.au
> > > Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
> > > ---
> > >  drivers/char/tpm/tpm_tis_i2c.c | 2 ++
> > >  1 file changed, 2 insertions(+)
> > > 
> > > diff --git a/drivers/char/tpm/tpm_tis_i2c.c b/drivers/char/tpm/tpm_tis_i2c.c
> > > index a897402cc36a..9511c0d50185 100644
> > > --- a/drivers/char/tpm/tpm_tis_i2c.c
> > > +++ b/drivers/char/tpm/tpm_tis_i2c.c
> > > @@ -383,6 +383,8 @@ MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_id);
> > >  #ifdef CONFIG_OF
> > >  static const struct of_device_id of_tis_i2c_match[] = {
> > >  	{ .compatible = "infineon,slb9673", },
> > > +	{ .compatible = "nuvoton,npct75x", },
> > > +	{ .compatible = "tcg,tpm-tis-i2c", },
> > 
> > What's the point of the generic compatible if you are adding the device
> > specific ones to the driver anyway?
> > 
> 
> $ git grep infineon,slb9673
> Documentation/devicetree/bindings/trivial-devices.yaml:          - infineon,slb9673

Hmm, this would then need to be moved into the new schema, out of
trivial devices.

> drivers/char/tpm/tpm_tis_i2c.c: { .compatible = "infineon,slb9673", },
> $ git grep nuvoton,npct75x
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts:            compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts:            compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
> $ git grep tcg,tpm-tis-i2c
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts:            compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts:            compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts:             compatible = "tcg,tpm-tis-i2c";

pog, undocumented compatibles.

> It looks like at least the generic entry is needed, given that it is quite
> likely that there is hardware out there using it. Other than that, this
> makes me wonder: Is there some official guideline describing if and when
> to use (only) generic devicetree compatible entries and when specific ones
> may / should / have to be used ? I suspect the answer to your question might
> simply be "because we did not know better", and it might be helpful to be
> able to say "please see XXX for details".

To me using generic compatibles is okay when there is another mechanism
to identify the device. This patch would make more sense if the addition
of nuvoton,npct75x was omitted and the dt-binding had

properties:
  compatible:
    items:
      - enum:
          - infineon,slb9673
          - nuvoton,npct75x
      - const: tcg,tpm-tis-i2c

And whenever new i2c tpms showed up the device specific compatible was
added to the bindings and the driver had only* the generic compatible
static const struct of_device_id of_tis_i2c_match[] = {
	{ .compatible = "infineon,slb9673", },
	{ .compatible = "tcg,tpm-tis-i2c", },
};

* well, and the existing one since that cannot be removed.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231212/05504858/attachment.sig>