[PATCH v2 3/3] arm64: dts: ti: k3-am642-evm: add overlay for icssg1 2nd port
MD Danish Anwar
danishanwar at ti.com
Tue Dec 12 08:58:32 PST 2023
The am642-evm doesn't allow to enable 2 x CPSW3g ports and 2 x ICSSG1 ports
all together, so base k3-am642-evm.dts enables by default 2 x CPSW3g ports
and 1 x ICSSG1 ports, but it also possible to support 1 x CPSW3g ports and
2 x ICSSG1 ports configuration.
This patch adds overlay to support 1 x CPSW3g ports and 2 x ICSSG1 ports
configuration:
- Add label name 'mdio_mux_1' for 'mdio-mux-1' node so that the node
'mdio-mux-1' can be disabled in the overlay using the label name.
- disable 2nd CPSW3g port
- update CPSW3g pinmuxes to not use RGMII2
- disable mdio-mux-1 and define mdio-mux-2 to route ICSSG1 MDIO to the
shared DP83869 PHY
- add and enable ICSSG1 RGMII2 pinmuxes
- enable ICSSG1 MII1 port
Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 7 +-
.../dts/ti/k3-am642-evm-icssg1-dualemac.dtso | 75 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +-
3 files changed, 82 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 1ac47876bc99..654d9cb6cfea 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
# Boards with AM65x SoC
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
@@ -103,6 +104,8 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+k3-am642-evm-icssg1-dualemac-dtbs := \
+ k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
k3-am625-sk-csi2-imx219.dtb \
@@ -113,7 +116,8 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am62a7-sk-csi2-imx219.dtb \
k3-am62a7-sk-csi2-ov5640.dtb \
k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
- k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
+ k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
+ k3-am642-evm-icssg1-dualemac.dtb
# Enable support for device-tree overlays
DTC_FLAGS_k3-am625-beagleplay += -@
@@ -121,6 +125,7 @@ DTC_FLAGS_k3-am625-sk += -@
DTC_FLAGS_k3-am62-lp-sk += -@
DTC_FLAGS_k3-am62a7-sk += -@
DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
+DTC_FLAGS_k3-am642-evm += -@
DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
DTC_FLAGS_k3-j721e-common-proc-board += -@
DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
new file mode 100644
index 000000000000..b2b1a6252e73
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for enabling 2nd ICSSG1 port on AM642 EVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ mdio-mux-2 {
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mdio_mux>;
+ mdio-parent-bus = <&icssg1_mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio at 0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg1_phy2: ethernet-phy at 3 {
+ reg = <3>;
+ tx-internal-delay-ps = <250>;
+ rx-internal-delay-ps = <2000>;
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+ icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+ AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+ AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+ AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+ AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+ AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+ AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+ AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+ AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+ AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+ AM64X_IOPAD(0x0148, PIN_OUTPUT, 2) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+ AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+ >;
+ };
+};
+
+&cpsw3g {
+ pinctrl-0 = <&rgmii1_pins_default>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mdio_mux_1 {
+ status = "disabled";
+};
+
+&icssg1_eth {
+ pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
+};
+
+&icssg1_emac1 {
+ status = "okay";
+ phy-handle = <&icssg1_phy2>;
+ phy-mode = "rgmii-id";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index c08b0223be52..6ae43c12419f 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -200,7 +200,7 @@ mdio_mux: mux-controller {
mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
};
- mdio-mux-1 {
+ mdio_mux_1: mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mdio_mux>;
mdio-parent-bus = <&cpsw3g_mdio>;
--
2.34.1
More information about the linux-arm-kernel
mailing list