[PATCH] ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node

[claudiu beznea]

On 11.12.2023 09:03, Mihai Sain wrote:
> On board the sdmmc0 interface is wired to a SD Card socket.
> According with mmc-controller bindings, the mmc-ddr-3_3v property
> is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
> Remove the mmc-ddr-3_3v property from sdmmc0 node.
> 
> Signed-off-by: Mihai Sain <mihai.sain at microchip.com>

Applied to at91-dt, thanks!

> ---
>  arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
> index d0a6dbd377df..f3ffb8f01d8a 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
> @@ -54,7 +54,6 @@ usb2: ehci at 500000 {
>  
>  		sdmmc0: sdio-host at a0000000 {
>  			bus-width = <8>;
> -			mmc-ddr-3_3v;
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&pinctrl_sdmmc0_default>;
>  			status = "okay";