[PATCH v4 11/17] drm/mediatek: Turn off the layers with zero width or height

[Hsiao Chien Sung]

We found that IGT (Intel GPU Tool) will try to commit layers with
zero width or height and lead to undefined behaviors in hardware.
Disable the layers in such situations.

Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 2 +-
 drivers/gpu/drm/mediatek/mtk_ethdr.c            | 7 ++++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 10d23e76acaa..8789442c039f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -156,7 +156,7 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 	merge = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MERGE0 + idx];
 	ethdr = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0];
 
-	if (!pending->enable) {
+	if (!pending->enable || !pending->width || !pending->height) {
 		mtk_merge_stop_cmdq(merge, cmdq_pkt);
 		mtk_mdp_rdma_stop(rdma_l, cmdq_pkt);
 		mtk_mdp_rdma_stop(rdma_r, cmdq_pkt);
diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.c b/drivers/gpu/drm/mediatek/mtk_ethdr.c
index 73c9e3da56a7..e95331c06815 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.c
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.c
@@ -163,7 +163,12 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,
 	if (idx >= 4)
 		return;
 
-	if (!pending->enable) {
+	if (!pending->enable || !pending->width || !pending->height) {
+		/*
+		 * instead of disabling layer with MIX_SRC_CON directly
+		 * set the size to 0 to avoid screen shift due to mixer
+		 * mode switch (hardware behavior)
+		 */
 		mtk_ddp_write(cmdq_pkt, 0, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_SIZE(idx));
 		return;
 	}
-- 
2.18.0