[RFC PATCH net-next v3 0/8] Add support for 10G Ethernet SerDes on MT7988

Daniel Golle daniel at makrotopia.org
Mon Dec 11 19:45:42 PST 2023


This series aims to add support for GMAC2 and GMAC3 of the MediaTek MT7988 SoC.
While the vendor SDK stuffs all this into their Ethernet driver, I've tried to
seperate things into a PHY driver, a PCS driver as well as changes to the
existing Ethernet and LynxI PCS driver.

 +--------------+   +----------------+   +------------------+
 |              +---|  USXGMII PCS   |---+                  |
 | Ethernet MAC |   +----------------+   | PEXTP SerDes PHY |
 |              +---|   SGMII PCS    |---+                  |
 +--------------+   +----------------+   +------------------+

Alltogether this allows using GMAC2 and GMAC3 with all possible interface modes,
including in-band-status if needed.

Note that this series depends on series "dt-bindings: clock: mediatek:
add MT7988 clock IDs"[1] as well as "dt-bindings: watchdog:
mediatek,mtk-wdt: add MT7988 watchdog and toprgu"[2] being merged
before.

[1]: https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=809031
[2]: https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=802588

Changes since RFC v2:
 - use clk_bulk_* when ever feasible
 - rework Ethernet <-> PCS driver link, use device_link
 
Changes since RFC v1:
 - drop patch inhibiting SGMII AN in 2500Base-X mode
 - make pcs-mtk-lynxi a proper platform driver
 - ... hence allowing to remove all the wrappers from the usxgmii driver
 - attach PEXTP to MAC instead of to USXGMII PCS

Daniel Golle (8):
  dt-bindings: phy: mediatek,xfi-pextp: add new bindings
  phy: add driver for MediaTek pextp 10GE SerDes PHY
  net: pcs: pcs-mtk-lynxi: add platform driver for MT7988
  dt-bindings: net: pcs: add bindings for MediaTek USXGMII PCS
  net: pcs: add driver for MediaTek USXGMII PCS
  dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  dt-bindings: net: mediatek,net: fix and complete mt7988-eth binding
  net: ethernet: mtk_eth_soc: add paths and SerDes modes for MT7988

 .../devicetree/bindings/net/mediatek,net.yaml | 180 +++++--
 .../bindings/net/pcs/mediatek,usxgmii.yaml    |  60 +++
 .../bindings/phy/mediatek,xfi-pextp.yaml      |  80 +++
 MAINTAINERS                                   |   3 +
 drivers/net/ethernet/mediatek/mtk_eth_path.c  | 122 ++++-
 drivers/net/ethernet/mediatek/mtk_eth_soc.c   | 291 +++++++++--
 drivers/net/ethernet/mediatek/mtk_eth_soc.h   | 107 +++-
 drivers/net/pcs/Kconfig                       |  11 +
 drivers/net/pcs/Makefile                      |   1 +
 drivers/net/pcs/pcs-mtk-lynxi.c               | 226 ++++++++-
 drivers/net/pcs/pcs-mtk-usxgmii.c             | 456 ++++++++++++++++++
 drivers/phy/mediatek/Kconfig                  |  11 +
 drivers/phy/mediatek/Makefile                 |   1 +
 drivers/phy/mediatek/phy-mtk-pextp.c          | 361 ++++++++++++++
 include/linux/pcs/pcs-mtk-lynxi.h             |  11 +
 include/linux/pcs/pcs-mtk-usxgmii.h           |  27 ++
 16 files changed, 1859 insertions(+), 89 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xfi-pextp.yaml
 create mode 100644 drivers/net/pcs/pcs-mtk-usxgmii.c
 create mode 100644 drivers/phy/mediatek/phy-mtk-pextp.c
 create mode 100644 include/linux/pcs/pcs-mtk-usxgmii.h

-- 
2.43.0



More information about the linux-arm-kernel mailing list