[PATCH v3 0/2] Add PCIe Endpoint overlays for J721E and J721S2

[Siddharth Vadapalli]

Hello,

This series adds device-tree overlays for enabling PCIe in Endpoint mode
of operation on J721E-EVM and J721S2-EVM.

NOTE: This series is based on linux-next tagged next-20231211.

v2:
https://lore.kernel.org/r/20231115085204.3578616-1-s-vadapalli@ti.com/
Changes since v2:
- Rebased series on linux-next tagged next-20231211.
- Collected Reviewed-by tag from:
  Ravi Gunasekaran <r-gunasekaran at ti.com>
- Updated Makefile based on Andrew's suggestion to build the DTBs
  corresponding to the overlays only with an OF_ALL_DTBS build config
  since the generated DTBs are not required except to ensure that the
  overlays apply on the base DTB.
  Reference:
  https://lore.kernel.org/r/20231128-csi_dts-v3-9-0bb11cfa9d43@ti.com

v1:
https://lore.kernel.org/r/20231020113222.3161829-1-s-vadapalli@ti.com/
Changes since v1:
- Rebased series on linux-next tagged next-20231114.

Regards,
Siddharth.

Siddharth Vadapalli (2):
  arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode
  arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode

 arch/arm64/boot/dts/ti/Makefile               | 10 +++-
 .../boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso    | 53 +++++++++++++++++++
 .../boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso   | 53 +++++++++++++++++++
 3 files changed, 115 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso

-- 
2.34.1