[PATCH v3 09/14] ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 schematic change

[Delphine CC Chiu]

Revise i2c14 and i2c15 schematic change:
- Revise adc128d818 adc mode for yosemite4 schematic change
- Revise ina233 for yosemite4 schematic change
- Remove idle state setting for yosemite4 NIC connection

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 31 ++++++++++++-------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index ccb5ecd8d9a6..ed2b1200603d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1010,44 +1010,54 @@ &i2c14 {
 	adc at 1d {
 		compatible = "ti,adc128d818";
 		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
+		ti,mode = /bits/ 8 <1>;
 	};
 
-	adc at 35 {
+	adc at 36 {
 		compatible = "ti,adc128d818";
-		reg = <0x35>;
-		ti,mode = /bits/ 8 <2>;
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
 	};
 
 	adc at 37 {
 		compatible = "ti,adc128d818";
 		reg = <0x37>;
-		ti,mode = /bits/ 8 <2>;
+		ti,mode = /bits/ 8 <1>;
 	};
 
 	power-sensor at 40 {
-		compatible = "ti,ina230";
+		compatible = "ti,ina233";
 		reg = <0x40>;
+		resistor-calibration = /bits/ 16 <0x0a00>;
+		current-lsb= /bits/ 16 <0x0001>;
 	};
 
 	power-sensor at 41 {
-		compatible = "ti,ina230";
+		compatible = "ti,ina233";
 		reg = <0x41>;
+		resistor-calibration = /bits/ 16 <0x0a00>;
+		current-lsb= /bits/ 16 <0x0001>;
 	};
 
 	power-sensor at 42 {
-		compatible = "ti,ina230";
+		compatible = "ti,ina233";
 		reg = <0x42>;
+		resistor-calibration = /bits/ 16 <0x0a00>;
+		current-lsb= /bits/ 16 <0x0001>;
 	};
 
 	power-sensor at 43 {
-		compatible = "ti,ina230";
+		compatible = "ti,ina233";
 		reg = <0x43>;
+		resistor-calibration = /bits/ 16 <0x0a00>;
+		current-lsb= /bits/ 16 <0x0001>;
 	};
 
 	power-sensor at 44 {
-		compatible = "ti,ina230";
+		compatible = "ti,ina233";
 		reg = <0x44>;
+		resistor-calibration = /bits/ 16 <0x0a00>;
+		current-lsb= /bits/ 16 <0x0001>;
 	};
 
 	temperature-sensor at 4e {
@@ -1217,7 +1227,6 @@ mctp at 10 {
 
 	i2c-mux at 72 {
 		compatible = "nxp,pca9544";
-		i2c-mux-idle-disconnect;
 		reg = <0x72>;
 
 		imux24: i2c at 0 {
-- 
2.25.1