[PATCH v3 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool

Chen-Yu Tsai wenst at chromium.org
Thu Dec 7 06:15:29 PST 2023


On Thu, Dec 7, 2023 at 10:00 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> Il 07/12/23 12:28, Chen-Yu Tsai ha scritto:
> > On Thu, Dec 7, 2023 at 8:23 PM Chen-Yu Tsai <wenst at chromium.org> wrote:
> >>
> >> On Thu, Dec 7, 2023 at 2:28 PM Chen-Yu Tsai <wenst at chromium.org> wrote:
> >>>
> >>> On Mon, Dec 4, 2023 at 11:27 PM AngeloGioacchino Del Regno
> >>> <angelogioacchino.delregno at collabora.com> wrote:
> >>>>
> >>>> Il 04/12/23 09:40, Chen-Yu Tsai ha scritto:
> >>>>> Tentacruel and Tentacool are MT8186 based Chromebooks based on the
> >>>>> Krabby design.
> >>>>>
> >>>>> Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
> >>>>> convertible device with touchscreen and stylus.
> >>>>>
> >>>>> Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
> >>>>> device. It does not have a touchscreen or stylus.
> >>>>>
> >>>>> The two devices both have two variants. The difference is a second
> >>>>> source touchpad controller that shares the same address as the original,
> >>>>> but is incompatible.
> >>>>>
> >>>>> The extra SKU IDs for the Tentacruel devices map to different sensor
> >>>>> components attached to the Embedded Controller. These are not visible
> >>>>> to the main processor.
> >>>>>
> >>>>> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> >>>>> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> >>>>> ---
> >>>>> Changes since v2:
> >>>>> - Picked up Conor's ack
> >>>>> - Rename touchpad to trackpad
> >>>>> - Drop pinctrl properties from trackpad in tentacruel/tentacool second
> >>>>>     source trackpad
> >>>>>
> >>>>> Changes since v1:
> >>>>> - Reorder SKU numbers in descending order.
> >>>>> - Fixed pinconfig node names
> >>>>> - Moved pinctrl-* properties after interrupts-*
> >>>>> - Switched to interrupts-extended for external components
> >>>>> - Marked ADSP as explicitly disabled, with a comment explaining that it
> >>>>>     stalls the system
> >>>>> - Renamed "touchpad" to "trackpad"
> >>>>> - Dropped bogus "no-laneswap" property from it6505 node
> >>>>> - Moved "realtek,jd-src" property to after all the regulator supplies
> >>>>> - Switched to macros for MT6366 regulator "regulator-allowed-modes"
> >>>>> - Renamed "vgpu" regulator name to allow coupling, with a comment
> >>>>>     containing the name used in the design
> >>>>> - Renamed "cr50" node name to "tpm"
> >>>>> - Moved trackpad_pins reference up to i2c2; workaround for second source
> >>>>>     component resource sharing.
> >>>>> - Fix copyright year
> >>>>> - Fixed touchscreen supply name
> >>>>>
> >>>>>    arch/arm64/boot/dts/mediatek/Makefile         |    4 +
> >>>>>    .../dts/mediatek/mt8186-corsola-krabby.dtsi   |  129 ++
> >>>>>    .../mt8186-corsola-tentacool-sku327681.dts    |   57 +
> >>>>>    .../mt8186-corsola-tentacool-sku327683.dts    |   24 +
> >>>>>    .../mt8186-corsola-tentacruel-sku262144.dts   |   44 +
> >>>>>    .../mt8186-corsola-tentacruel-sku262148.dts   |   26 +
> >>>>>    .../boot/dts/mediatek/mt8186-corsola.dtsi     | 1719 +++++++++++++++++
> >>>>>    7 files changed, 2003 insertions(+)
> >>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> >>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> >>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> >>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> >>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> >>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> >>>>>
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> >>>>> index e6e7592a3645..442af61b1305 100644
> >>>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> >>>>> @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
> >>>>>    dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> >>>>>    dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> >>>>>    dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> >>>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
> >>>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
> >>>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
> >>>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
> >>>>>    dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> >>>>>    dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> >>>>>    dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> >>>>> new file mode 100644
> >>>>> index 000000000000..9b2b64525961
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> >>>>> @@ -0,0 +1,129 @@
> >>>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >>>>> +/*
> >>>>> + * Copyright 2022 Google LLC
> >>>>> + */
> >>>>> +
> >>>>> +/dts-v1/;
> >>>>> +#include "mt8186-corsola.dtsi"
> >>>>> +#include <dt-bindings/gpio/gpio.h>
> >>>>> +
> >>>>> +/ {
> >>>>> +     aliases {
> >>>>> +             i2c4 = &i2c4;
> >>>>> +     };
> >>>>> +};
> >>>>> +
> >>>>> +&dsi_out {
> >>>>> +     remote-endpoint = <&ps8640_in>;
> >>>>> +};
> >>>>> +
> >>>>> +&i2c0 {
> >>>>> +     clock-frequency = <400000>;
> >>>>> +
> >>>>> +     ps8640: edp-bridge at 8 {
> >>>>> +             compatible = "parade,ps8640";
> >>>>> +             reg = <0x8>;
> >>>>> +             powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
> >>>>> +             reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
> >>>>> +             pinctrl-names = "default";
> >>>>> +             pinctrl-0 = <&ps8640_pins>;
> >>>>> +             vdd12-supply = <&mt6366_vrf12_reg>;
> >>>>> +             vdd33-supply = <&mt6366_vcn33_reg>;
> >>>>> +
> >>>>> +             ports {
> >>>>> +                     #address-cells = <1>;
> >>>>> +                     #size-cells = <0>;
> >>>>> +
> >>>>> +                     port at 0 {
> >>>>> +                             reg = <0>;
> >>>>> +
> >>>>> +                             ps8640_in: endpoint {
> >>>>> +                                     remote-endpoint = <&dsi_out>;
> >>>>> +                             };
> >>>>> +                     };
> >>>>> +
> >>>>> +                     port at 1 {
> >>>>> +                             reg = <1>;
> >>>>> +
> >>>>> +                             ps8640_out: endpoint {
> >>>>> +                                     remote-endpoint = <&panel_in>;
> >>>>> +                             };
> >>>>> +                     };
> >>>>> +             };
> >>>>> +
> >>>>> +             aux-bus {
> >>>>> +                     panel {
> >>>>> +                             compatible = "edp-panel";
> >>>>> +                             power-supply = <&pp3300_disp_x>;
> >>>>> +                             backlight = <&backlight_lcd0>;
> >>>>> +
> >>>>> +                             port {
> >>>>> +                                     panel_in: endpoint {
> >>>>> +                                             remote-endpoint = <&ps8640_out>;
> >>>>> +                                     };
> >>>>> +                             };
> >>>>> +                     };
> >>>>> +             };
> >>>>> +     };
> >>>>> +};
> >>>>> +
> >>>>> +&i2c1 {
> >>>>> +     i2c-scl-internal-delay-ns = <10000>;
> >>>>> +
> >>>>> +     touchscreen: touchscreen at 10 {
> >>>>> +             compatible = "hid-over-i2c";
> >>>>> +             reg = <0x10>;
> >>>>> +             interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
> >>>>> +             pinctrl-names = "default";
> >>>>> +             pinctrl-0 = <&touchscreen_pins>;
> >>>>> +             post-power-on-delay-ms = <10>;
> >>>>> +             hid-descr-addr = <0x0001>;
> >>>>> +             vdd-supply = <&pp3300_s3>;
> >>>>> +     };
> >>>>> +};
> >>>>> +
> >>>>> +&i2c4 {
> >>>>> +     pinctrl-names = "default";
> >>>>> +     pinctrl-0 = <&i2c4_pins>;
> >>>>> +     clock-frequency = <400000>;
> >>>>> +     status = "okay";
> >>>>> +
> >>>>> +     proximity at 28 {
> >>>>> +             compatible = "semtech,sx9324";
> >>>>> +             reg = <0x28>;
> >>>>> +             interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
> >>>>> +             pinctrl-names = "default";
> >>>>> +             pinctrl-0 = <&sar_sensor_pins>;
> >>>>> +             vdd-supply = <&mt6366_vio18_reg>;
> >>>>> +             svdd-supply = <&mt6366_vio18_reg>;
> >>>>> +             #io-channel-cells = <1>;
> >>>>
> >>>>   From the newest DTS coding style document:
> >>>>
> >>>> The following order of properties in device nodes is preferred:
> >>>>
> >>>> 1. compatible
> >>>> 2. reg
> >>>> 3. ranges
> >>>> 4. Standard/common properties (defined by common bindings, e.g. without
> >>>>      vendor-prefixes)
> >>>> 5. Vendor-specific properties
> >>>> 6. status (if applicable)
> >>>> 7. Child nodes, where each node is preceded with a blank line
> >>>>
> >>>> The "status" property is by default "okay", thus it can be omitted.
> >>>>
> >>>> The above-described ordering follows this approach:
> >>>>
> >>>> 1. Most important properties start the node: compatible then bus addressing to
> >>>>      match unit address.
> >>>> 2. Each node will have common properties in similar place.
> >>>> 3. Status is the last information to annotate that device node is or is not
> >>>>      finished (board resources are needed).
> >>>
> >>> Wishing for a checking tool now. :p
> >>>
> >>>> #io-channel-cells goes after `reg` (same for the other instances) :-)
> >>>
> >>> Ack (though it looks weird).
> >>>
> >>>>> +     };
> >>>>> +};
> >>>>> +
> >>>>> +&pio {
> >>>>> +     i2c4_pins: i2c4-pins {
> >>>>> +             pins-bus {
> >>>>> +                     pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
> >>>>> +                              <PINMUX_GPIO135__FUNC_SCL4>;
> >>>>> +                     bias-disable;
> >>>>> +                     drive-strength = <4>;
> >>>>> +                     input-enable;
> >>>>> +             };
> >>>>> +     };
> >>>>> +
> >>>>> +     ps8640_pins: ps8640-pins {
> >>>>> +             pins-pwrdn-rst {
> >>>>> +                     pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
> >>>>> +                              <PINMUX_GPIO98__FUNC_GPIO98>;
> >>>>> +                     output-low;
> >>>>> +             };
> >>>>> +     };
> >>>>> +
> >>>>> +     sar_sensor_pins: sar-sensor-pins {
> >>>>> +             pins-irq {
> >>>>> +                     pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
> >>>>> +                     input-enable;
> >>>>> +                     bias-pull-up;
> >>>>> +             };
> >>>>> +     };
> >>>>> +};
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> >>>>> new file mode 100644
> >>>>> index 000000000000..9bb64353ca65
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> >>>>> @@ -0,0 +1,57 @@
> >>>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >>>>> +/*
> >>>>> + * Copyright 2022 Google LLC
> >>>>> + */
> >>>>> +
> >>>>> +/dts-v1/;
> >>>>> +#include "mt8186-corsola-krabby.dtsi"
> >>>>> +
> >>>>> +/ {
> >>>>> +     model = "Google Tentacool board";
> >>>>> +     compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
> >>>>> +     chassis-type = "laptop";
> >>>>> +};
> >>>>> +
> >>>>> +/* Tentacool omits the pen. */
> >>>>> +&gpio_keys {
> >>>>> +     status = "disabled";
> >>>>> +};
> >>>>> +
> >>>>> +/* Tentacool omits the touchscreen; nothing else is on i2c1. */
> >>>>> +&i2c1 {
> >>>>> +     status = "disabled";
> >>>>> +};
> >>>>> +
> >>>>> +&keyboard_controller {
> >>>>> +     function-row-physmap = <
> >>>>> +             MATRIX_KEY(0x00, 0x02, 0)       /* T1 */
> >>>>> +             MATRIX_KEY(0x03, 0x02, 0)       /* T2 */
> >>>>> +             MATRIX_KEY(0x02, 0x02, 0)       /* T3 */
> >>>>> +             MATRIX_KEY(0x01, 0x02, 0)       /* T4 */
> >>>>> +             MATRIX_KEY(0x03, 0x04, 0)       /* T5 */
> >>>>> +             MATRIX_KEY(0x02, 0x04, 0)       /* T6 */
> >>>>> +             MATRIX_KEY(0x01, 0x04, 0)       /* T7 */
> >>>>> +             MATRIX_KEY(0x02, 0x09, 0)       /* T8 */
> >>>>> +             MATRIX_KEY(0x01, 0x09, 0)       /* T9 */
> >>>>> +             MATRIX_KEY(0x00, 0x04, 0)       /* T10 */
> >>>>> +     >;
> >>>>> +
> >>>>> +     linux,keymap = <
> >>>>> +             MATRIX_KEY(0x00, 0x02, KEY_BACK)
> >>>>> +             MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> >>>>> +             MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> >>>>> +             MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> >>>>> +             MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> >>>>> +             MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> >>>>> +             MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> >>>>> +             MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> >>>>> +             MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> >>>>> +             MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> >>>>> +             CROS_STD_MAIN_KEYMAP
> >>>>> +     >;
> >>>>> +};
> >>>>> +
> >>>>> +/* Tentacool omits the touchscreen. */
> >>>>> +&touchscreen {
> >>>>> +     status = "disabled";
> >>>>> +};
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> >>>>> new file mode 100644
> >>>>> index 000000000000..c3ae6f9616c8
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> >>>>> @@ -0,0 +1,24 @@
> >>>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >>>>> +/*
> >>>>> + * Copyright 2023 Google LLC
> >>>>> + */
> >>>>> +
> >>>>> +#include "mt8186-corsola-tentacool-sku327681.dts"
> >>>>> +
> >>>>> +/ {
> >>>>> +     compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
> >>>>> +};
> >>>>> +
> >>>>> +/* This variant replaces only the trackpad controller. */
> >>>>> +&i2c2 {
> >>>>> +     /delete-node/ trackpad at 15;
> >>>>
> >>>> Why are you deleting the trackpad at 15 node?
> >>>>
> >>>> You can simply override the compatible, or actually omit the compatible string
> >>>> in the *.dtsi file, and set just that in each board *.dts.
> >>>>
> >>>> dtsi:
> >>>>          trackpad_a: trackpad at 15 {
> >>>>                  /* Compatible is set in each board dts */
> >>>>                  reg, interrupts, others
> >>>>          }
> >>>>
> >>>> dts:
> >>>>
> >>>> &trackpad_a {
> >>>>          compatible = "elan,ekth3000";
> >>>> };
> >>>
> >>> The original trackpad at 15 comes from the base design and is used for all
> >>> models other than the ones with the conflicting component. Hence I believe
> >>> it should live in the base .dtsi.
> >>>
> >>> The delete-node makes it much less likely to have any lingering properties.
> >>> These are not nodes that just differ in compatible strings like DSI panels.
> >>> They have incompatible bindings. For example, elan,ekth3000 uses "vcc-supply",
> >>> while "hid-over-i2c" uses "vdd-supply".
> >>>
> >>> And going back to my previous argument, the base design used one specific
> >>> model which is carried over to all the other models.
> >>>
> >>> Suppose I add a phandle to the original trackpad, and do
> >>>
> >>>      /delete-node/ &trackpad;
> >>>
> >>> Would that be better?
> >>>
> >>>> other dts:
> >>>>
> >>>> &trackpad_a {
> >>>>          compatible = "hid-over-i2c";
> >>>> };
> >>>>
> >>>>> +
> >>>>> +     trackpad at 15 {
> >>>>> +             compatible = "hid-over-i2c";
> >>>>> +             reg = <0x15>;
> >>>>> +             interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> >>>>> +             hid-descr-addr = <0x0001>;
> >>>>> +             vdd-supply = <&pp3300_s3>;
> >>>>> +             wakeup-source;
> >>>>> +     };
> >>>>> +};
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> >>>>> new file mode 100644
> >>>>> index 000000000000..26d3451a5e47
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> >>>>> @@ -0,0 +1,44 @@
> >>>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >>>>> +/*
> >>>>> + * Copyright 2022 Google LLC
> >>>>> + */
> >>>>> +
> >>>>> +/dts-v1/;
> >>>>> +#include "mt8186-corsola-krabby.dtsi"
> >>>>> +
> >>>>> +/ {
> >>>>> +     model = "Google Tentacruel board";
> >>>>> +     compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
> >>>>> +                  "google,tentacruel-sku262145", "google,tentacruel-sku262144",
> >>>>> +                  "google,tentacruel", "mediatek,mt8186";
> >>>>> +     chassis-type = "convertible";
> >>>>> +};
> >>>>> +
> >>>>> +&keyboard_controller {
> >>>>> +     function-row-physmap = <
> >>>>> +             MATRIX_KEY(0x00, 0x02, 0)       /* T1 */
> >>>>> +             MATRIX_KEY(0x03, 0x02, 0)       /* T2 */
> >>>>> +             MATRIX_KEY(0x02, 0x02, 0)       /* T3 */
> >>>>> +             MATRIX_KEY(0x01, 0x02, 0)       /* T4 */
> >>>>> +             MATRIX_KEY(0x03, 0x04, 0)       /* T5 */
> >>>>> +             MATRIX_KEY(0x02, 0x04, 0)       /* T6 */
> >>>>> +             MATRIX_KEY(0x01, 0x04, 0)       /* T7 */
> >>>>> +             MATRIX_KEY(0x02, 0x09, 0)       /* T8 */
> >>>>> +             MATRIX_KEY(0x01, 0x09, 0)       /* T9 */
> >>>>> +             MATRIX_KEY(0x00, 0x04, 0)       /* T10 */
> >>>>> +     >;
> >>>>> +
> >>>>> +     linux,keymap = <
> >>>>> +             MATRIX_KEY(0x00, 0x02, KEY_BACK)
> >>>>> +             MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> >>>>> +             MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> >>>>> +             MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> >>>>> +             MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> >>>>> +             MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> >>>>> +             MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> >>>>> +             MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> >>>>> +             MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> >>>>> +             MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> >>>>> +             CROS_STD_MAIN_KEYMAP
> >>>>> +     >;
> >>>>> +};
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> >>>>> new file mode 100644
> >>>>> index 000000000000..447b57b12b41
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> >>>>> @@ -0,0 +1,26 @@
> >>>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >>>>> +/*
> >>>>> + * Copyright 2023 Google LLC
> >>>>> + */
> >>>>> +
> >>>>> +#include "mt8186-corsola-tentacruel-sku262144.dts"
> >>>>> +
> >>>>> +/ {
> >>>>> +     compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
> >>>>> +                  "google,tentacruel-sku262149", "google,tentacruel-sku262148",
> >>>>> +                  "google,tentacruel", "mediatek,mt8186";
> >>>>> +};
> >>>>> +
> >>>>> +/* This variant replaces only the trackpad controller. */
> >>>>> +&i2c2 {
> >>>>> +     /delete-node/ trackpad at 15;
> >>>>> +
> >>>>> +     trackpad at 15 {
> >>>>> +             compatible = "hid-over-i2c";
> >>>>> +             reg = <0x15>;
> >>>>> +             interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> >>>>> +             hid-descr-addr = <0x0001>;
> >>>>> +             vdd-supply = <&pp3300_s3>;
> >>>>> +             wakeup-source;
> >>>>> +     };
> >>>>> +};
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> >>>>> new file mode 100644
> >>>>> index 000000000000..8726b2916ef1
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> >>>>> @@ -0,0 +1,1719 @@
> >>>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >>>>> +/*
> >>>>> + * Copyright (C) 2022 MediaTek Inc.
> >>>>> + */
> >>>>> +/dts-v1/;
> >>>>> +#include "mt8186.dtsi"
> >>>>> +#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
> >>>>> +#include <dt-bindings/gpio/gpio.h>
> >>>>> +#include <dt-bindings/input/input.h>
> >>>>> +#include <dt-bindings/input/gpio-keys.h>
> >>>>> +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
> >>>>> +
> >>>>> +/ {
> >>>>> +     aliases {
> >>>>> +             i2c0 = &i2c0;
> >>>>> +             i2c1 = &i2c1;
> >>>>> +             i2c2 = &i2c2;
> >>>>> +             i2c3 = &i2c3;
> >>>>> +             i2c5 = &i2c5;
> >>>>> +             mmc0 = &mmc0;
> >>>>> +             mmc1 = &mmc1;
> >>>>> +             serial0 = &uart0;
> >>>>> +     };
> >>>>> +
> >>>>> +     chosen {
> >>>>> +             stdout-path = "serial0:115200n8";
> >>>>> +     };
> >>>>> +
> >>>>> +     memory at 40000000 {
> >>>>> +             device_type = "memory";
> >>>>> +             /* The size should be filled in by the bootloader. */
> >>>>> +             reg = <0 0x40000000 0 0>;
> >>>>> +     };
> >>>>> +
> >>>>> +     backlight_lcd0: backlight-lcd0 {
> >>>>> +             compatible = "pwm-backlight";
> >>>>> +             pwms = <&pwm0 0 500000>;
> >>>>> +             power-supply = <&ppvar_sys>;
> >>>>> +             enable-gpios = <&pio 152 0>;
> >>>>> +             brightness-levels = <0 1023>;
> >>>>> +             num-interpolated-steps = <1023>;
> >>>>> +             default-brightness-level = <576>;
> >>>>> +     };
> >>>>> +
> >>>>> +     btsco: bt-sco {
> >>>>
> >>>> Do you really need the phandle to bt-sco?
> >>>
> >>> No. But the sound node probably should be referencing it and the dmic
> >>> node via DT instead of hardcoding the DAI and codec names in the machine
> >>> driver.
> >>>
> >>> Anyway, will remove the label for now.
> >>>
> >>>> Also, this node describes a codec, so: "bt-sco-codec" please!
> >>>
> >>> Ack.
> >>>
> >>>>> +             compatible = "linux,bt-sco";
> >>>>> +             #sound-dai-cells = <0>;
> >>>>> +     };
> >>>>> +
> >>>>> +     dmic_codec: dmic-codec {
> >>>>
> >>>> This phandle is unused...
> >>>
> >>> Removed.
> >>>
> >>>> ..snip..
> >>>>
> >>>>> +
> >>>>> +&adsp {
> >>>>> +     memory-region = <&adsp_dma_mem>, <&adsp_mem>;
> >>>>> +     status = "disabled"; /* causes stall */
> >>>>
> >>>> This is a firmware issue: once the correct firmware is uploaded to linux-firmware
> >>>> the dsp node can get enabled... so it we make sure that this happens before this
> >>>> devicetree gets picked, we can avoid a second commit enabling audio.
> >>>>
> >>>> After all, since we *want to* use the Xtensa DSP for audio, without it booted
> >>>> sound won't work *anyway*.... so having the firmware in place can also be seen
> >>>> as a direct dependency of the entire audio functionality.
> >>>>
> >>>> P.S.: The FW that is distributed with ChromeOS works just fine!
> >>>
> >>> I'll give that a try.
> >>
> >> I have:
> >>
> >> sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-5494c
> >> sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> >> sof-audio-of-mt8186 10680000.adsp: unknown sof_ext_man header type 3 size 0x30
> >> sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-5494c
> >>
> >> and it's still hanging.
> >
> > Looks like I was still using the bad version due to module options...
> >
> > After removing the options, I now have:
> >
> > sof-audio-of-mt8186 10680000.adsp: DT DSP detected
> > sof-audio-of-mt8186 10680000.adsp: assigned reserved memory node memory at 61000000
> > sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-714c6
> > sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> > sof-audio-of-mt8186 10680000.adsp: unknown sof_ext_man header type 3 size 0x30
> > sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-714c6
> > sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> >
> > But sound is still deferring probe:
> >
> > # cat /sys/kernel/debug/devices_deferred
> > sound    mt8186_mt6366_rt1019_rt5682s:
> > mt8186_mt6366_rt1019_rt5682s_dev_probe snd_soc_register_card fail
> >
>
> Yes, this happens because of the missing IT6505 HDMI audio support - but it's not
> giving any side effect anyway... in this case, as far as DT is concerned... there
> will be no change, and no side effects on working parts of the system, so we can
> (imo) upstream this even if the driver-code-only dependency is not there yet.

I have the it6505 audio patches backported. But maybe they don't actually
work anymore. :(

> Cheers!
> Angelo
>
> > ChenYu
> >
> >> And FTR, I think sound is also blocked on the it6505 audio support series.
> >>
> >> ChenYu
> >>
> >>
> >>
> >>>>> +};
> >>>>> +
> >>>>> +&afe {
> >>>>> +     i2s0-share = "I2S1";
> >>>>> +     i2s3-share = "I2S2";
> >>>>> +     status = "okay";
> >>>>> +};
> >>>>> +
> >>>>
> >>>> ..snip..
> >>>>
> >>>>> +&i2c2 {
> >>>>> +     pinctrl-names = "default";
> >>>>> +     /*
> >>>>> +      * Trackpad pin put here to work around second source components
> >>>>> +      * sharing the pinmux in steelix designs.
> >>>>> +      */
> >>>>> +     pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
> >>>>
> >>>> There's no choice for now... even if this is not beautiful to see... but it's still
> >>>> ok for me because we can revisit this later when the HW Prober mechanism will be
> >>>> upstreamed.
> >>>
> >>> Yup. Working on that.
> >>>
> >>>>> +     clock-frequency = <400000>;
> >>>>> +     i2c-scl-internal-delay-ns = <10000>;
> >>>>> +     status = "okay";
> >>>>> +
> >>>>> +     trackpad at 15 {
> >>>>> +             compatible = "elan,ekth3000";
> >>>>> +             reg = <0x15>;
> >>>>> +             interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> >>>>> +             vcc-supply = <&pp3300_s3>;
> >>>>> +             wakeup-source;
> >>>>> +     };
> >>>>> +};
> >>>>> +
> >>>>
> >>>> Thanks,
> >>>> Angelo
> >>>
> >>> Thanks for the review again.
> >>>
> >>> ChenYu
>



More information about the linux-arm-kernel mailing list