[PATCH] arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes

[Wadim Egorov]

Am 04.12.23 um 22:23 schrieb Garrett Giordano:
> Communication between the R5F subsystem and Linux takes place using DMA
> memory regions and mailboxes. Here we add DT nodes for the memory
> regions and mailboxes to facilitate communication between the R5
> clusters and Linux as remoteproc will fail to start if no memory
> regions or mailboxes are provided.
>
> Fixes: c48ac0efe6d7 ("arm64: dts: ti: Add support for phyBOARD-Electra-AM642")
> Signed-off-by: Garrett Giordano <ggiordano at phytec.com>

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>


> ---
>   .../boot/dts/ti/k3-am64-phycore-som.dtsi      | 102 +++++++++++++++++-
>   1 file changed, 101 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> index 1c2c8f0daca9..37a33006c1fc 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> @@ -29,7 +29,7 @@ memory at 80000000 {
>   		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
>   	};
>   
> -	reserved-memory {
> +	reserved_memory: reserved-memory {
>   		#address-cells = <2>;
>   		#size-cells = <2>;
>   		ranges;
> @@ -39,6 +39,54 @@ secure_ddr: optee at 9e800000 {
>   			alignment = <0x1000>;
>   			no-map;
>   		};
> +
> +		main_r5fss0_core0_dma_memory_region: r5f-dma-memory at a0000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa0000000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		main_r5fss0_core0_memory_region: r5f-memory at a0100000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa0100000 0x00 0xf00000>;
> +			no-map;
> +		};
> +
> +		main_r5fss0_core1_dma_memory_region: r5f-dma-memory at a1000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa1000000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		main_r5fss0_core1_memory_region: r5f-memory at a1100000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa1100000 0x00 0xf00000>;
> +			no-map;
> +		};
> +
> +		main_r5fss1_core0_dma_memory_region: r5f-dma-memory at a2000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa2000000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		main_r5fss1_core0_memory_region: r5f-memory at a2100000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa2100000 0x00 0xf00000>;
> +			no-map;
> +		};
> +
> +		main_r5fss1_core1_dma_memory_region: r5f-dma-memory at a3000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa3000000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		main_r5fss1_core1_memory_region: r5f-memory at a3100000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0xa3100000 0x00 0xf00000>;
> +			no-map;
> +		};
>   	};
>   
>   	leds {
> @@ -160,6 +208,34 @@ &cpsw_port2 {
>   	status = "disabled";
>   };
>   
> +&mailbox0_cluster2 {
> +	status = "okay";
> +
> +	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
> +		ti,mbox-rx = <0 0 2>;
> +		ti,mbox-tx = <1 0 2>;
> +	};
> +
> +	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
> +		ti,mbox-rx = <2 0 2>;
> +		ti,mbox-tx = <3 0 2>;
> +	};
> +};
> +
> +&mailbox0_cluster4 {
> +	status = "okay";
> +
> +	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
> +		ti,mbox-rx = <0 0 2>;
> +		ti,mbox-tx = <1 0 2>;
> +	};
> +
> +	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
> +		ti,mbox-rx = <2 0 2>;
> +		ti,mbox-tx = <3 0 2>;
> +	};
> +};
> +
>   &main_i2c0 {
>   	status = "okay";
>   	pinctrl-names = "default";
> @@ -180,6 +256,30 @@ i2c_som_rtc: rtc at 52 {
>   	};
>   };
>   
> +&main_r5fss0_core0 {
> +	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
> +	memory-region = <&main_r5fss0_core0_dma_memory_region>,
> +			<&main_r5fss0_core0_memory_region>;
> +};
> +
> +&main_r5fss0_core1 {
> +	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
> +	memory-region = <&main_r5fss0_core1_dma_memory_region>,
> +			<&main_r5fss0_core1_memory_region>;
> +};
> +
> +&main_r5fss1_core0 {
> +	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
> +	memory-region = <&main_r5fss1_core0_dma_memory_region>,
> +			<&main_r5fss1_core0_memory_region>;
> +};
> +
> +&main_r5fss1_core1 {
> +	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
> +	memory-region = <&main_r5fss1_core1_dma_memory_region>,
> +			<&main_r5fss1_core1_memory_region>;
> +};
> +
>   &ospi0 {
>   	status = "okay";
>   	pinctrl-names = "default";