[PATCH v2 1/1] KVM: arm64: allow the VM to select DEVICE_* and NORMAL_NC for IO memory

[Catalin Marinas]

On Tue, Dec 05, 2023 at 09:00:15AM +0530, ankita at nvidia.com wrote:
> From: Ankit Agrawal <ankita at nvidia.com>
> 
> Currently, KVM for ARM64 maps at stage 2 memory that is considered device
> (i.e. it is not RAM) with DEVICE_nGnRE memory attributes; this setting
> overrides (as per the ARM architecture [1]) any device MMIO mapping
> present at stage 1, resulting in a set-up whereby a guest operating
> system cannot determine device MMIO mapping memory attributes on its
> own but it is always overridden by the KVM stage 2 default.
> 
> This set-up does not allow guest operating systems to select device
> memory attributes independently from KVM stage-2 mappings
> (refer to [1], "Combining stage 1 and stage 2 memory type attributes"),
> which turns out to be an issue in that guest operating systems
> (e.g. Linux) may request to map devices MMIO regions with memory
> attributes that guarantee better performance (e.g. gathering
> attribute - that for some devices can generate larger PCIe memory
> writes TLPs) and specific operations (e.g. unaligned transactions)
> such as the NormalNC memory type.
> 
> The default device stage 2 mapping was chosen in KVM for ARM64 since
> it was considered safer (i.e. it would not allow guests to trigger
> uncontained failures ultimately crashing the machine) but this
> turned out to be asynchronous (SError) defeating the purpose.
> 
> Failures containability is a property of the platform and is independent
> from the memory type used for MMIO device memory mappings.
> 
> Actually, DEVICE_nGnRE memory type is even more problematic than
> Normal-NC memory type in terms of faults containability in that e.g.
> aborts triggered on DEVICE_nGnRE loads cannot be made, architecturally,
> synchronous (i.e. that would imply that the processor should issue at
> most 1 load transaction at a time - it cannot pipeline them - otherwise
> the synchronous abort semantics would break the no-speculation attribute
> attached to DEVICE_XXX memory).
> 
> This means that regardless of the combined stage1+stage2 mappings a
> platform is safe if and only if device transactions cannot trigger
> uncontained failures and that in turn relies on platform capabilities
> and the device type being assigned (i.e. PCIe AER/DPC error containment
> and RAS architecture[3]); therefore the default KVM device stage 2
> memory attributes play no role in making device assignment safer
> for a given platform (if the platform design adheres to design
> guidelines outlined in [3]) and therefore can be relaxed.
> 
> For all these reasons, relax the KVM stage 2 device memory attributes
> from DEVICE_nGnRE to Normal-NC. Add a new kvm_pgtable_prot flag for
> Normal-NC.
> 
> The Normal-NC was chosen over a different Normal memory type default
> at stage-2 (e.g. Normal Write-through) to avoid cache allocation/snooping.
> 
> Relaxing S2 KVM device MMIO mappings to Normal-NC is not expected to
> trigger any issue on guest device reclaim use cases either (i.e. device
> MMIO unmap followed by a device reset) at least for PCIe devices, in that
> in PCIe a device reset is architected and carried out through PCI config
> space transactions that are naturally ordered with respect to MMIO
> transactions according to the PCI ordering rules.
> 
> Having Normal-NC S2 default puts guests in control (thanks to
> stage1+stage2 combined memory attributes rules [1]) of device MMIO
> regions memory mappings, according to the rules described in [1]
> and summarized here ([(S1) - stage1], [(S2) - stage 2]):
> 
> S1           |  S2           | Result
> NORMAL-WB    |  NORMAL-NC    | NORMAL-NC
> NORMAL-WT    |  NORMAL-NC    | NORMAL-NC
> NORMAL-NC    |  NORMAL-NC    | NORMAL-NC
> DEVICE<attr> |  NORMAL-NC    | DEVICE<attr>
> 
> It is worth noting that currently, to map devices MMIO space to user
> space in a device pass-through use case the VFIO framework applies memory
> attributes derived from pgprot_noncached() settings applied to VMAs, which
> result in device-nGnRnE memory attributes for the stage-1 VMM mappings.
> 
> This means that a userspace mapping for device MMIO space carried
> out with the current VFIO framework and a guest OS mapping for the same
> MMIO space may result in a mismatched alias as described in [2].
> 
> Defaulting KVM device stage-2 mappings to Normal-NC attributes does not
> change anything in this respect, in that the mismatched aliases would
> only affect (refer to [2] for a detailed explanation) ordering between
> the userspace and GuestOS mappings resulting stream of transactions
> (i.e. it does not cause loss of property for either stream of
> transactions on its own), which is harmless given that the userspace
> and GuestOS access to the device is carried out through independent
> transactions streams.
> 
> [1] section D8.5 - DDI0487_I_a_a-profile_architecture_reference_manual.pdf
> [2] section B2.8 - DDI0487_I_a_a-profile_architecture_reference_manual.pdf
> [3] sections 1.7.7.3/1.8.5.2/appendix C - DEN0029H_SBSA_7.1.pdf
> 
> Applied over next-20231201
> 
> History
> =======
> v1 -> v2
> - Updated commit log to the one posted by
>   Lorenzo Pieralisi <lpieralisi at kernel.org> (Thanks!)
> - Added new flag to represent the NORMAL_NC setting. Updated
>   stage2_set_prot_attr() to handle new flag.
> 
> v1 Link:
> https://lore.kernel.org/all/20230907181459.18145-3-ankita@nvidia.com/
> 
> Signed-off-by: Ankit Agrawal <ankita at nvidia.com>
> Suggested-by: Jason Gunthorpe <jgg at nvidia.com>
> Acked-by: Catalin Marinas <catalin.marinas at arm.com>

In the light of having to keep this relaxation only for PCIe devices, I
will withdraw my Ack until we come to a conclusion.

Thanks.

-- 
Catalin