[PATCH] serial: imx: Fix clock imbalance

Marek Vasut marex at denx.de
Mon Dec 4 16:50:57 PST 2023


Disable and unprepare the clock on every exit from probe function
after the clock were prepared and enabled to avoid enable/disable
imbalance.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: "Ilpo Järvinen" <ilpo.jarvinen at linux.intel.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig at pengutronix.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: Jiri Slaby <jirislaby at kernel.org>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Rob Herring <robh at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Sergey Organov <sorganov at gmail.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Tom Rix <trix at redhat.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-serial at vger.kernel.org
---
 drivers/tty/serial/imx.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 52dd8a6b87603..1cce66e5d05d8 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2332,10 +2332,8 @@ static int imx_uart_probe(struct platform_device *pdev)
 	}
 
 	ret = uart_get_rs485_mode(&sport->port);
-	if (ret) {
-		clk_disable_unprepare(sport->clk_ipg);
-		return ret;
-	}
+	if (ret)
+		goto err_clk;
 
 	if (sport->port.rs485.flags & SER_RS485_ENABLED &&
 	    (!sport->have_rtscts && !sport->have_rtsgpio))
@@ -2436,7 +2434,7 @@ static int imx_uart_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request rx irq: %d\n",
 				ret);
-			return ret;
+			goto err_clk;
 		}
 
 		ret = devm_request_irq(&pdev->dev, txirq, imx_uart_txint, 0,
@@ -2444,7 +2442,7 @@ static int imx_uart_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request tx irq: %d\n",
 				ret);
-			return ret;
+			goto err_clk;
 		}
 
 		ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0,
@@ -2452,14 +2450,14 @@ static int imx_uart_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request rts irq: %d\n",
 				ret);
-			return ret;
+			goto err_clk;
 		}
 	} else {
 		ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_int, 0,
 				       dev_name(&pdev->dev), sport);
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request irq: %d\n", ret);
-			return ret;
+			goto err_clk;
 		}
 	}
 
@@ -2468,6 +2466,10 @@ static int imx_uart_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, sport);
 
 	return uart_add_one_port(&imx_uart_uart_driver, &sport->port);
+
+err_clk:
+	clk_disable_unprepare(sport->clk_ipg);
+	return ret;
 }
 
 static void imx_uart_remove(struct platform_device *pdev)
-- 
2.42.0




More information about the linux-arm-kernel mailing list