[PATCH v1 3/3] ARM: dts: rockchip: rk3036-kylin: add hdmi-connector node

[Alex Bee]

Hi Johan,
Am 04.12.23 um 18:40 schrieb Johan Jonker:
> Add hdmi-connector node to comply with the inno_hdmi binding.
> 
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> ---
>   arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> index 67e1e04139e7..a213333be011 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> @@ -13,6 +13,17 @@ memory at 60000000 {
>   		reg = <0x60000000 0x20000000>;
>   	};
> 
> +	hdmi_con: hdmi-con {
> +		compatible = "hdmi-connector";
> +		type = "c";
According to [0], kylin has an A-Type HDMI port - so this should be
  +		type = "a";

[0] http://rockchip.wikidot.com/kylin

Regards,
Alex
> +
> +		port {
> +			hdmi_con_in: endpoint {
> +				remote-endpoint = <&hdmi_out_con>;
> +			};
> +		};
> +	};
> +
>   	leds: gpio-leds {
>   		compatible = "gpio-leds";
> 
> @@ -110,6 +121,12 @@ &hdmi {
>   	status = "okay";
>   };
> 
> +&hdmi_out {
> +	hdmi_out_con: endpoint {
> +		remote-endpoint = <&hdmi_con_in>;
> +	};
> +};
> +
>   &i2c1 {
>   	clock-frequency = <400000>;
> 
> --
> 2.39.2
> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip