[PATCH v2 2/5] ARM: dts: rockchip: Add power-controller for RK3128

[Heiko Stübner]

Hi Alex,

Am Samstag, 2. Dezember 2023, 17:36:15 CET schrieb Alex Bee:
> Am 02.12.23 um 16:51 schrieb Heiko Stübner:
> > Am Samstag, 2. Dezember 2023, 13:51:41 CET schrieb Alex Bee:
> >> Add power controller and qos nodes for RK3128 in order to use
> >> them as powerdomains.
> > does the power-domain controller work with the incomplete set of
> > pm-domains too?
> 
> Yes, it does - the missing domains can request idle only and can't be 
> powered on/off - if no one requests idle they are just up all the time.
> 
> > What I have in mind is
> > - adding the power-controller node with the existing set of power-domains
> > - the gpu pm-domain is in there
> > - adding the gpu parts
> 
> My main concern about adding them later was the change of the ABI after 
> they've been exposed in the SoC DT. If that's not an issue - sure: I can 
> add them in a separate series.

An ABI change would be _changing_ the domain-ids in the rk3128-power.h
I think :-) .

Right now the existing domain ids in the header are already exposed to the
world, so someone could already use them, but not the new ones.



Heiko

> > And a second series with
> > - patch1 from here
> > - a dts patch adding the additional pm-domains to rk3128.dtsi
> > - I guess patch1 also should be split into a patch adding the binding-ids
> >    and a separate patch for the code addition.
> 
> Yeah, I noticed this also :)
> 
> Regards,
> 
> Alex
> 
> >
> >
> > Heiko
> >
> >> Signed-off-by: Alex Bee <knaerzche at gmail.com>
> >> ---
> >>   arch/arm/boot/dts/rockchip/rk3128.dtsi | 101 +++++++++++++++++++++++++
> >>   1 file changed, 101 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
> >> index 4e8b38604ecd..b72905db04f7 100644
> >> --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
> >> +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
> >> @@ -8,6 +8,7 @@
> >>   #include <dt-bindings/interrupt-controller/arm-gic.h>
> >>   #include <dt-bindings/interrupt-controller/irq.h>
> >>   #include <dt-bindings/pinctrl/rockchip.h>
> >> +#include <dt-bindings/power/rk3128-power.h>
> >>   
> >>   / {
> >>   	compatible = "rockchip,rk3128";
> >> @@ -133,6 +134,106 @@ smp-sram at 0 {
> >>   	pmu: syscon at 100a0000 {
> >>   		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
> >>   		reg = <0x100a0000 0x1000>;
> >> +
> >> +		power: power-controller {
> >> +			compatible = "rockchip,rk3128-power-controller";
> >> +			#power-domain-cells = <1>;
> >> +			#address-cells = <1>;
> >> +			#size-cells = <0>;
> >> +
> >> +			power-domain at RK3128_PD_VIO {
> >> +				reg = <RK3128_PD_VIO>;
> >> +				clocks = <&cru ACLK_CIF>,
> >> +					 <&cru HCLK_CIF>,
> >> +					 <&cru DCLK_EBC>,
> >> +					 <&cru HCLK_EBC>,
> >> +					 <&cru ACLK_IEP>,
> >> +					 <&cru HCLK_IEP>,
> >> +					 <&cru ACLK_LCDC0>,
> >> +					 <&cru HCLK_LCDC0>,
> >> +					 <&cru PCLK_MIPI>,
> >> +					 <&cru ACLK_RGA>,
> >> +					 <&cru HCLK_RGA>,
> >> +					 <&cru ACLK_VIO0>,
> >> +					 <&cru ACLK_VIO1>,
> >> +					 <&cru HCLK_VIO>,
> >> +					 <&cru HCLK_VIO_H2P>,
> >> +					 <&cru DCLK_VOP>,
> >> +					 <&cru SCLK_VOP>;
> >> +				pm_qos = <&qos_ebc>,
> >> +					 <&qos_iep>,
> >> +					 <&qos_lcdc>,
> >> +					 <&qos_rga>,
> >> +					 <&qos_vip>;
> >> +				#power-domain-cells = <0>;
> >> +			};
> >> +
> >> +			power-domain at RK3128_PD_VIDEO {
> >> +				reg = <RK3128_PD_VIDEO>;
> >> +				clocks = <&cru ACLK_VDPU>,
> >> +					 <&cru HCLK_VDPU>,
> >> +					 <&cru ACLK_VEPU>,
> >> +					 <&cru HCLK_VEPU>,
> >> +					 <&cru SCLK_HEVC_CORE>;
> >> +				pm_qos = <&qos_vpu>;
> >> +				#power-domain-cells = <0>;
> >> +			};
> >> +
> >> +			power-domain at RK3128_PD_GPU {
> >> +				reg = <RK3128_PD_GPU>;
> >> +				clocks = <&cru ACLK_GPU>;
> >> +				pm_qos = <&qos_gpu>;
> >> +				#power-domain-cells = <0>;
> >> +			};
> >> +
> >> +			power-domain at RK3128_PD_CRYPTO {
> >> +				reg = <RK3128_PD_CRYPTO>;
> >> +				clocks = <&cru HCLK_CRYPTO>,
> >> +					 <&cru SCLK_CRYPTO>;
> >> +				pm_qos = <&qos_crypto>;
> >> +				#power-domain-cells = <0>;
> >> +			};
> >> +		};
> >> +	};
> >> +
> >> +	qos_crypto: qos at 10128080 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x10128080 0x20>;
> >> +	};
> >> +
> >> +	qos_gpu: qos at 1012d000 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012d000 0x20>;
> >> +	};
> >> +
> >> +	qos_vpu: qos at 1012e000 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012e000 0x20>;
> >> +	};
> >> +
> >> +	qos_rga: qos at 1012f000 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012f000 0x20>;
> >> +	};
> >> +
> >> +	qos_ebc: qos at 1012f080 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012f080 0x20>;
> >> +	};
> >> +
> >> +	qos_iep: qos at 1012f100 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012f100 0x20>;
> >> +	};
> >> +
> >> +	qos_lcdc: qos at 1012f180 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012f180 0x20>;
> >> +	};
> >> +
> >> +	qos_vip: qos at 1012f200 {
> >> +		compatible = "rockchip,rk3128-qos", "syscon";
> >> +		reg = <0x1012f200 0x20>;
> >>   	};
> >>   
> >>   	gic: interrupt-controller at 10139000 {
> >>
> >
> >
> >
>