[PATCH 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool

[Eugen Hristev]

On 11/27/23 15:05, AngeloGioacchino Del Regno wrote:
> Il 27/11/23 05:00, Chen-Yu Tsai ha scritto:
>> On Mon, Oct 23, 2023 at 5:05 PM Eugen Hristev
>> <eugen.hristev at collabora.com> wrote:
>>>
>>> On 10/13/23 02:02, Chen-Yu Tsai wrote:
>>>> Tentacruel and Tentacool are MT8186 based Chromebooks based on the
>>>> Krabby design.
>>>>
>>>> Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
>>>> convertible device with touchscreen and stylus.
>>>>
>>>> Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
>>>> device. It does not have a touchscreen or stylus.
>>>>
>>>> The two devices both have two variants. The difference is a second
>>>> source touchpad controller that shares the same address as the original,
>>>> but is incompatible.
>>>>
>>>> The extra SKU IDs for the Tentacruel devices map to different sensor
>>>> components attached to the Embedded Controller. These are not visible
>>>> to the main processor.
>>>>
>>>> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
>>>> ---
>>>>    arch/arm64/boot/dts/mediatek/Makefile         |    4 +
>>>>    .../dts/mediatek/mt8186-corsola-krabby.dtsi   |  130 ++
>>>>    .../mt8186-corsola-tentacool-sku327681.dts    |   49 +
>>>>    .../mt8186-corsola-tentacool-sku327683.dts    |   26 +
>>>>    .../mt8186-corsola-tentacruel-sku262144.dts   |   44 +
>>>>    .../mt8186-corsola-tentacruel-sku262148.dts   |   28 +
>>>>    .../boot/dts/mediatek/mt8186-corsola.dtsi     | 1704 +++++++++++++++++
>>>>    7 files changed, 1985 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
>>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
>>>>
>>
>> [...]
>>
>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
>>>> new file mode 100644
>>>> index 000000000000..42ebab1bafeb
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
>>>> @@ -0,0 +1,1704 @@
>>
>> [...]
>>
>>>
>>> Hi Chen-Yu,
>>>
>>> These two aud_gpio_tdm empty entries cause this message to be printed:
>>>
>>> [   12.949519] mt8186_mt6366_rt1019_rt5682s sound: there is not valid
>>> maps for state aud_gpio_tdm_off
>>> [   12.959025] mt8186_mt6366_rt1019_rt5682s sound: there is not valid
>>> maps for state aud_gpio_tdm_on
>>
>> I guess we need to teach the sound driver to ignore empty pinmux states?
> 
> ...and we need to teach to the bindings that the aud_gpio_tdm_{off,on} are
> optional states and can be omitted.

Hello Angelo,

The binding does not appear to specify any required states. Am I getting this
wrong? Hence, we can just remove these states from the DT node.


Hello Chen-Yu,

The error message comes from the pinctrl, from dt_to_map_one_config() .
I believe we can safely just remove these two if corsola device does not use TDM.
>From my perspective it is pointless to have two empty pinctrl states just for the
sake of it if there are no pins involved.
Please correct me if you have more knowledge about it.

Thanks,
Eugen

> 
> Cheers,
> Angelo
> 
>>
>> ChenYu
> 
> 
>