[PATCH] arm64: defconfig: increase SERIAL_8250_NR_UARTS

[Nishanth Menon]

On 09:48-20231201, Francesco Dolcini wrote:
> On Fri, Dec 01, 2023 at 12:49:19AM -0600, Nishanth Menon wrote:
> > On 08:03-20231201, Tony Lindgren wrote:
> > > * Francesco Dolcini <francesco at dolcini.it> [231130 23:17]:
> > > > Increase CONFIG_SERIAL_8250_NR_UARTS from 4 to 8, the current legacy value
> > > > is not adequate for embedded systems that use SoCs where it's common to
> > > > have a large number of serial ports.
> > > > 
> > > > No need to change CONFIG_SERIAL_8250_RUNTIME_UARTS, see commit 9d86719f8769
> > > > ("serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS").
> > > > 
> > > > This enables using the UART connected Bluetooth device on Verdin AM62
> > > > board.
> > > 
> > > OK makes sense for distro use.
> > > 
> > > Disabling unused ports leads into port names shifting, which we still can't
> > > easily tolerate until we have the DEVNAME:0.0 style addressing available for
> > > ports. So for now we still depend CONFIG_SERIAL_8250_NR_UARTS, eventually
> > > that too should become just a legacy ISA port array.. Meanwhile:
> > > 
> > > Reviewed-by: Tony Lindgren <tony at atomide.com>
> > 
> > I'd prefer to get Arnd's view on the topic as well (I kind of
> > recollect some historic discussion which I am not failing to trace
> > that there usage model doesn't exceed 4 and aliases could be used to
> > map these as required for the platform).
> 
> The usage model that triggered this change exceed 4, we >4 uart in
> use at the same time.
> 
> And the issue is not really "distro use", and I do not think anything
> about aliases matter (the BT device is described as a child of the uart
> in the DT).
> 
>   &main_uart5 {
>     bluetooth {
>       compatible = "nxp,88w8987-bt";
>     };
>   };
> 
> The change here is required to have basic hardware functionalities
> working for kernel development and debugging using the in-tree
> defconfig.
> 
> 
> > Now 8 or 5 (which seems to be the relevant need) is subjective :(
> 

I'd suggest to elaborate on "This enables using the UART connected
Bluetooth device on Verdin AM62 board."
Commit message a bit more to indicate what each of the uarts are used
for - this will help explain that we have a real platform that needs
more than 4 uarts simultaneously. we seem to have survived quite a few
years with count of 4.. so we need to defend why this change now and why
it helps the ecosystem.. just my 2 cents.

Yes, I did indeed look and found the case you are indicating, but for
rest of the community, commit message should indicate why (it will help
if other boards benefit as well, but I personally feel this case, if
elaborated is sufficient enough reason by itself).


-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D