[PATCH V3 1/3] arm64: dts: imx8mp: Add easrc node

[Marek Vasut]

On 8/31/23 06:44, Adam Ford wrote:
> The i.MX8MP has an asynchronous sample rate converter which seems
> to be the same as what is available on the i.MX8M Nano.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---
> V3:  No Change.  The dt-binding update was already accepted into the sound tree, so that patch
>       was dropped from the series
> 
> V2:  No Change.
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 83d907294fbc..3167706d81e1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1459,6 +1459,26 @@ sai7: sai at 30c80000 {
>   					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
>   					status = "disabled";
>   				};
> +
> +				easrc: easrc at 30c90000 {
> +					compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc";
> +					reg = <0x30c90000 0x10000>;
> +					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> +					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>;
> +					clock-names = "mem";
> +					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
> +					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
> +					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
> +					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
> +					dma-names = "ctx0_rx", "ctx0_tx",
> +						    "ctx1_rx", "ctx1_tx",
> +						    "ctx2_rx", "ctx2_tx",
> +						    "ctx3_rx", "ctx3_tx";
> +					firmware-name = "imx/easrc/easrc-imx8mn.bin";

Should the firmware name really be imx8mn or should it be imx8mp ?

I think the later is better, you can always add a symlink for the 
firmware name, and you can discern mx8mn/mp firmwares on the same rootfs 
in case that was ever needed in the future.